Share 2D documents to SDx and review - Intergraph Smart 3D - Administration & Configuration - Hexagon

Intergraph Smart 3D Integration - Project As-Built with HxGN SDx

Intergraph Smart 3D
Project As-Built with SDx
Search by Category
Administration & Configuration
Smart 3D Version

Before you can share documents (drawings or reports), you must:

  1. If you are sharing and revising for a Change Management Smart 3D model in which the work area was synchronized from an SDx As-Built project, you must set the active As-Built project in the System list in the main Smart 3D toolbar. Select More in the System list, and then ensure that the project assigned to the Change Management model is selected for the revision. For As-Built information, see Prepare Smart 3D Handover model data for Project As-Built and Create a Smart 3D Change Management model in the Smart 3D Project As-Built with HxGN Help, and Work with Project As-Built and SDx in the Smart 3D Project Management Help.

  2. Right-click a component containing one or more drawings, and then select the Share Documents Command to open the Share Dialog.

  3. Edit information as necessary for the 2D drawings. When multiple drawings are selected, only property values shared by all of the selected drawings display in the dialog.

  4. Select Share for the Operation.

  5. Click OK to share the selected drawings to SDx. When the process is complete, Documents have been shared successfully displays. If the View Log button is enabled, messages are available concerning the operation. These messages include errors, warning, and informational messages.