Connect new Smart 3D pipe to a SIO nozzle - Intergraph Smart 3D - Administration & Configuration - Hexagon PPM

Intergraph Smart 3D Integration - Project As-Built with HxGN SDx

PPMProduct
Intergraph Smart 3D
PPMCategory_custom
Administration & Configuration
Version_SThreeD_Custom
13
SPFVersion_custom
10
  1. In the Piping task, click Route Pipe Command on the vertical toolbar.

  2. Select the SIO nozzle. Two types of nozzles are accessible:

    • SIO equipment-based piping nozzle

    • SIO straight pipe or piping component ports

  3. Set the piping port properties as needed in the New Pipe Run Dialog.

  4. Route the Smart 3D pipe from the selected nozzle.