Demolish and undemolish Smart Interop Objects in the model - Intergraph Smart 3D - Administration & Configuration - Hexagon

Intergraph Smart 3D Integration - Project As-Built with HxGN SDx

Language
English
Product
Intergraph Smart 3D
Subproduct
Project As-Built with SDx
Search by Category
Administration & Configuration
Smart 3D Version
13.1

Demolish Smart Interop Objects

  1. Click Edit > Demolish Command to display the Demolish ribbon.

  2. Click Select on the ribbon, and then select one or more Smart Interop Objects in the model or in the Workspace Explorer to demolish. You must select Smart Interop Objects that are claimed to the As-Built project.

    Smart 3D sets the Construction Requirement and Construction Type to Demolished for the selected Smart Interop Object, and the Construction Requirement is read-only.

    ConstructionRequirementandType

  3. If required, use the ribbon to set the Construction Type for the selected Smart Interop Objects.

  4. Click Finish on the ribbon to demolish the selected objects.

    Demolished Smart Interop Objects display in red in the Workspace Explorer and in a red wireframe in the graphic view.

Undemolish Smart Interop Objects

  1. Click Edit > Undemolish Command to display the Undemolish ribbon.

  2. Click Select on the ribbon, and then select one or more Smart Interop Objects in the model or in the Workspace Explorer to undemolish. You must select Smart Interop Objects that are currently demolished.

    The default value for Construction Requirement and Construction Type is Existing.

    ConstructionRequirementandType_undemolish

  3. If needed, use the ribbon to set the Construction Requirement and Construction Type for the selected Smart Interop Objects.

  4. Click Finish on the ribbon to undemolish the selected objects.

    The software reverts the color of each undemolished Smart Interop Object in the graphic view and in the Workspace Explorer to its original state.

  • The software sets the Is Demolished property of each demolished Smart Interop Object to True. When a Smart Interop Object is undemolished, the software sets the IsDemolished property back to False.

  • If errors occur during the demolish or undemolish process, the software displays a message and provides a link to the error log.

  • When you demolish a Smart Interop Object that has connected design objects, the software displays a message and prompts you to select an action. In the example graphic below, the object is either connected to a design object or has a child that is a design object.

    DemolishErrors

    Cancel

    Exits the command without performing any action.

    Demolish all

    Demolishes the selected Smart Interop Objects and deletes any connected design objects.

    Skip listed

    Ignores Smart Interop Objects with connected design objects. For example, the software would not demolish the PL-001 object in the above graphic.

    If you try to demolish PL-001 using the Select Nested command on the Shortcut Menu, the software demolishes all nested pipe runs that have no connection with a design pipe run. The software does not demolish the pipeline.