Hole Tab (Hole Trace Properties Dialog) - Intergraph Smart 3D - Help - Hexagon PPM

Intergraph Smart 3D Hole Management

Language
English
Product
Intergraph Smart 3D
Subproduct
Hole Management
Search by Category
Help
Smart 3D Version
13

Specifies the general properties of the hole trace.

System

Select the parent system for the hole trace.

Name

Displays the name of the hole trace. You can define the name yourself by setting the Naming Rule box to User Defined.

Naming rule

Select the Hole Naming Rules to use to name the hole trace. Select User Defined to define the name yourself in the Name box.

Application

Displays theSmart 3D task associated with the hole trace. For example, if the hole trace is the result of a pipe penetrating a structure, then Piping appears. Similarly, if the hole trace is the result of an HVAC duct, then HVAC appears, or if the hole trace is the result of a Hanger with Hole Aspect, then Hangers and Supports appears.

Outfitting Part Name

Displays the name of the outfitting part.

Hole Clearance Rule

Specify the rule that controls the clearance around the outfitting part in the hole trace. For more information, see Best Fit Clearance Rules.

User Answers

Select answers to questions asked by Smart Occurrence Hole Rules, and then select from a list of hole trace options that match all of the answers. The default answers are determined by the rules.

Opening design type

Specifies the design opening property for the opening or hole. The default value is Permanent Access. The list is defined by the CutoutDesignType codelist.

Opening planning method

Specifies the planning opening property for the opening or hole. The default value is Design. The list is defined by the CutoutPlanningMethod codelist.

Opening production method

Specifies the production opening property for the opening or hole. The default value is Cut. The list is defined by the CutoutProductionMethod codelist.

For more information about opening properties, see Single Hole.

Board Management

Symmetry

Displays the symmetry value for the hole. The Board Management Service determines the symmetry value.

Symmetrical Part

Displays the name of the symmetrical hole, if available. The Board Management Service determines the symmetrical part.