Basic Malleable Beam Clamp Properties - Intergraph Smart 3D - Reference Data

Intergraph Smart 3D Hangers and Supports SmartParts Configuration

Language
English
Product
Intergraph Smart 3D
Subproduct
3D Symbols
Search by Category
Reference Data
Smart 3D Version
11 (2016)

These properties define the geometry of the malleable beam clamp.

IJUAhsMalleableClamp::MalleableConfig

Specifies the malleable beam clamp configuration to show if the clamp has nut, eyenut, or no rod attachment. It uses the hsMalleableConfig codelist.

IJUAhsMalleableClamp::TopWidth

Specifies the top width of malleable beam clamp from starting of flange till the inner malleable clamp touches the flange. This is a double value. This value must be positive. If the TopWidth value is not specified, then an error is thrown.

IJUAhsMalleableClamp::Depth

Specifies the depth of the beam clamp. This value must be positive. If the depth value is not specified, then an error is thrown.

IJUAhsMalleableClamp::Thickness

Specifies the thickness of the clamp. This value must be positive. If the Thickness value is not specified, then an error is thrown.

IJUAhsRodTakeOut::RodTakeOut

Specifies the distance between the flange surface to starting of nut/eyenut surface. This is a double value and must be greater than zero.

IJUAhsMalleableClamp::NutShape

String specifying the name of the nut shape. NutShape value is optional. If this value is specified, then nut shape is added to the malleable beam clamp.

IJUAhsMalleableClamp::EyeNutShape

String specifying the name of the eyenut shape. EyeNutShape value is optional. If this value is specified, then eyenut shape is added to the malleable beam clamp.

IJOAhsAngle1::Angle1

Specifies the angle between the structure center line and eyenut shape. It is used for sloped steel configuration. Both positive and negative values are accepted. This is applicable only for malleable configuration with eyenut. If the value specified for configuration is other than eyenut, then the angle will be ignored and the graphics are not updated.

IJUAhsOverLength1::OverLength1

Specifies the amount that the rod extends past the threaded base of nut/eyenut. This value is used to ensure that rod take-out calculations are correct.