Library Name: SmartParts
Workbook: HS_S3DParts.xls
Codelist: HS_S3DParts_Codelist.xls
ProgID: HSSmartPart,Ingr.SP3D.Content.Support.Symbols.Insulation
Part Name: Insulation
Part Description: Insulation SmartPart
Prerequisites
Ensure that these workbooks are available in the following location before you place the parts:
[Product Folder]\CatalogData\BulkLoad\DataFiles\
-
AllCodeLists.xls
-
AllCommon.xls
-
GenericNamingRules.xls
-
HS_System.xls
-
HS_System_Codelist.xls
-
HS_S3DParts_Codelists.xls
The HS_S3DParts.xls file provides sample SmartPart data and is available from the following location:
[Product Folder]\CatalogData\BulkLoad\DataFiles
Part Placement
To place a sample insulation SmartPart delivered with the catalog:
-
Click Tasks > Hanger and Supports.
-
Place a design support on a pipe.
-
Click Place Part, and then select the design support.
-
In the Select Part dialog box, select a part from Parts > SmartParts > S3D Standard > Insulation > Polyurethane Insulation as shown below:
Part Properties
Millimeters (mm) is the default unit. Use in at the end of dimensional values to specify inches. Ports are shown as points highlighted in red.
ProgID
HSSmartPart,Ingr.SP3D.Content.Support.Symbols.Insulation
Example: S3Dhs_Insulation sheet in HS_S3DParts.xls
Local Coordinate System
When using the Add Part command, the insulation displays in the most frequently used orientation with the above coordinate system. The route port remains at the origin (0,0,0).