These properties are used to specify the different port types and their sizes for the spreader beam. A spreader beam can have the following six ports:
-
Route - origin of the spreader beam
-
Topport1 - top port1
-
Topport2 - top port2; if two top attachments are present
-
Botport1 - bottom port1
-
Botport2 - bottom port2; if two bottom attachments are present
-
BotMiddleport - bottom middle port; if the bottom middle attachment is present
If the spreader beam has one middle attachment and two bottom attachments then the spreader beam would have three ports as shown in the following illustration.
If the spreader beam has two top attachments without any middle attachment and two bottom attachments then it will have five ports as shown in the following illustration.
If the spreader beam has two top attachment with no middle attachments and no bottom attachments then the spreader beam would have three ports as shown in the following illustration.
-
Route
Port1:Route
|
Port Type |
Size |
Min Size |
Max Size |
|
1200 - other |
0 |
-9999 |
9999 |
-
Top port1
Port2:Topport1
|
Port Type |
Size |
Min Size |
Max Size |
|
1200 - other |
0 |
-9999 |
9999 |
-
Top port2
Port3:Topport2
|
Port Type |
Size |
Min Size |
Max Size |
|
1200 - other |
0 |
-9999 |
9999 |
-
Bot port1
Port4:Botport1
|
Port Type |
Size |
Min Size |
Max Size |
|
1200 - other |
0 |
-9999 |
9999 |
-
Bot port2
Port5:Botport2
|
Port Type |
Size |
Min Size |
Max Size |
|
1200 - other |
0 |
-9999 |
9999 |
-
BotMiddleport
Port6:BotMiddleport
|
Port Type |
Size |
Min Size |
Max Size |
|
1200 - other |
0 |
-9999 |
9999 |