Bolt/Pin Properties - Intergraph Smart 3D - Reference Data - Hexagon PPM

Intergraph Smart 3D Hangers and Supports SmartParts Configuration

Language
English
Product
Intergraph Smart 3D
Subproduct
Hangers and Supports
Search by Category
Reference Data
Smart 3D Version
13

These properties define the geometry of the bolts/pins of the beam clamp.

IJUAhsPin1::Pin1Diameter

Specifies the diameter of the bolt/pin. If this is used as a bolt, then bolt diameter should be same as the pin diameter.

Pin1Diameter ( Beam Clamp )

IJUAhsPin1::Pin1Length

Specifies the length of bolt/pin. If this is used as a bolt, then bolt length should be same as the pin length.

Pin1Length ( Beam Clamp )

Pin1Length should be greater than or equal to Length1 of the bottom shape.

IJUAhsHeight3::Height3

Specifies the distance of the pin from the top port of the clip to center of the pin.

Pinheight3 ( Beam Clamp )