These properties define specifications for each corner and use the following short codes:
-
TL=TopLeft
-
TR=TopRight
-
BL=BottomLeft
-
BR=BottomRight.
The following properties are optional. They are used for different corner shapes for the plate.
IJUAhsTLCorner::TLCornerType
Specifies the corner type for the shape of the top left corner of the plate shape. The value for this column is a codelist number defined in the hsCornerShape sheet in the HS_S3DParts_Codelist.xls workbook. Valid codes are listed in the HS_S3DParts_Codelist.xls workbook on the hsCornerShape sheet. Similar properties exist for the other three corners. Codelist number and CornerType are listed below.
0 – None
2 – Angled Notch Corner – XY Chamfer
3 – Angled Notch Corner – XY Edges
4 – Angled Notch Corner – X with angle
5 – Angled Notch Corner – Y with angle
6 – Rounded Notch Corner (Concave)
IJUAhsTLCorner::TLCornerX
Specifies the horizontal dimension of the corner shape.
IJUAhsTLCorner::TLCornerY
Specifies the vertical dimension of the corner shape.
IJUAhsTLCorner::TLCornerRadius
Specifies the radius for the corner shape.