Hangers and Supports contains steel parts referred to as Secondary Steel. The following secondary steel standards are delivered with the product. See Section Shapes for a listing of the actual section shapes that are available for each steel standard.
All secondary steel depends on a corresponding Structural Steel workbook. The prerequisite Structural Steel workbook is named for each of the equivalent Hangers and Supports workbook below. The prerequisite structural steel workbook should be bulkloaded before bulkloading the hangers and supports steel workbook.
Delivered New Steel Standards
All new delivered Steel standard workbooks require the HS_System_Codelist.xls workbook to be already bulkloaded or it should be bulkloaded at the same time.
AISC LRFD 3.1
Hangers and Supports Workbook |
HS_Struct-AISC-LRFD-3.1_Deprecated.xls |
Standard Name |
AISC-LRFD-3.1 |
Description |
American Institute of Steel Construction - Manual of Steel Construction(LRFD) |
Organization |
AISC |
Date |
2003 |
Version |
3.1 |
S3D Structural Workbook Prerequisite |
StructCrossSections-AISC-LRFD-3.1.xls |
AISC LRFD 3.0
Hangers and Supports Workbook |
HS_Struct-AISC-LRFD-3.0.xls |
Standard Name |
AISC-LRFD-3.0 |
Description |
American Institute of Steel Construction - Manual of Steel Construction(LRFD) |
Organization |
AISC |
Date |
2002 |
Version |
3.0 |
S3D Structural Workbook Prerequisite |
StructCrossSections-AISC-LRFD-3.0.xls |
AISC Metric
Hangers and Supports Workbook |
HS_Struct-AISC-Metric.xls |
Standard Name |
AISC-METRIC |
Description |
American Institute of Steel Construction - Manual of Steel Construction(LRFD) |
Organization |
AISC |
Date |
2008 |
Version |
3.1 |
S3D Structural Workbook Prerequisite |
StructCrossSections-AISC-Metric.xls |
AISC SHAPES 3.1
Hangers and Supports Workbook |
HS_Struct-AISC-SHAPES-3.1.xls |
Standard Name |
AISC-SHAPES-3.1 |
Description |
American Institute of Steel Construction - Manual of Steel Construction(LRFD) |
Organization |
AISC |
Date |
2003 |
Version |
3.1 |
S3D Structural Workbook Prerequisite |
StructCrossSections-AISC-SHAPES-3.1.xls |
AUST
Hangers and Supports Workbook |
HS_Struct-AUST.xls |
Standard Name |
Aust |
Description |
Australian Steel Table |
Organization |
AUST |
Date |
2003 |
Version |
1.0 |
S3D Structural Workbook Prerequisite |
StructCrossSections-AUST.xls |
AUST 05
Hangers and Supports Workbook |
HS_Struct-AUST-05.xls |
Standard Name |
AUST-OneSteel-05 |
Description |
Australian Steel Table - 2005 - OneSteel Electronic Catalog Version 2.0.7 |
Organization |
AUST |
Date |
2005 |
Version |
2.0.7 |
S3D Structural Workbook Prerequisite |
StructCrossSections-AUST-05.xls |
BS
Hangers and Supports Workbook |
HS_Struct-BS.xls |
Standard Name |
BS5950-1:2000 |
Description |
Structural use of steelwork in buildings data from the Corus Web Site |
Organization |
BSI |
Date |
2000 |
Version |
|
S3D Structural Workbook Prerequisite |
StructCrossSections-BS.xls |
Chile 2000
Hangers and Supports Workbook |
HS_Struct-Chile-2000.xls |
Standard Name |
ICHA-2000 |
Description |
Chile Steel Table As Per ICHA-2000 |
Organization |
ICHA |
Date |
2008 |
Version |
1.0 |
S3D Structural Workbook Prerequisite |
StructCrossSections-Chile-2000.xls |
China 2006
Hangers and Supports Workbook |
HS_Struct-China-2006.xls |
Standard Name |
GB |
Description |
Chinese GB (Guojia Biaozhun) and Standard Steel Tables as noted |
Organization |
Standardization Administration of China |
Date |
Varies |
Version |
1.0 |
S3D Structural Workbook Prerequisite |
StructCrossSections-China-2006.xls |
CISC 7.2
Hangers and Supports Workbook |
HS_Struct-CISC-7.2.xls |
Standard Name |
CISC-7.2 |
Description |
Canadian Institute of Steel Construction - 7th Edition, 2nd printing |
Organization |
CISC |
Date |
2002 |
Version |
7.2 |
S3D Structural Workbook Prerequisite |
StructCrossSections-CISC-7.2.xls |
CISC 8.1
Hangers and Supports Workbook |
HS_Struct-CISC-8.1.xls |
Standard Name |
CISC-8.1 |
Description |
Canadian Institute of Steel Construction - 8th Edition, 1st printing |
Organization |
CISC |
Date |
2002 |
Version |
8.1 |
S3D Structural Workbook Prerequisite |
StructCrossSections-CISC-8.1.xls |
Euro
Hangers and Supports Workbook |
HS_Struct-Euro.xls |
Standard Name |
Euro |
Description |
European Section Sizes |
Organization |
Euro |
Date |
2002 |
Version |
1.0 |
S3D Structural Workbook Prerequisite |
StructCrossSections-Euro.xls |
EURO OTUA 2002
Hangers and Supports Workbook |
HS_Struct-EURO-OTUA-2002.xls |
Standard Name |
EURO-OTUA-2002 |
Description |
Caractéristiques Géométriques et Statiques OTUA Edition 2002 |
Organization |
OTUA |
Date |
2002 |
Version |
1 |
S3D Structural Workbook Prerequisite |
StructCrossSections-EURO-OTUA-2002.xls |
Japan
Hangers and Supports Workbook |
HS_Struct-Japan.xls |
Standard Name |
Japan |
Description |
Japanese Section Table |
Organization |
Japan |
Date |
2002 |
Version |
1.0 |
S3D Structural Workbook Prerequisite |
StructCrossSections-Japan.xls |
Japan 2005
Hangers and Supports Workbook |
HS_Struct-Japan-2005.xls |
Standard Name |
JIS-2005 |
Description |
Japanese Section Table |
Organization |
JIS |
Date |
2005 |
Version |
1.0 |
S3D Structural Workbook Prerequisite |
StructCrossSections-Japan-2005.xls |
Russia
Hangers and Supports Workbook |
HS_Struct-Russia.xls |
Standard Name |
Russian |
Description |
Russian Steel Table |
Organization |
Russia |
Date |
2006 |
Version |
1.0 |
S3D Structural Workbook Prerequisite |
StructCrossSections-Russia.xls |
SAISC 2002
Hangers and Supports Workbook |
HS_Struct-SAISC-2002.xls |
Standard Name |
SAISC-2002 |
Description |
South African Institute of Steel Construction |
Organization |
SAISC |
Date |
2002 |
Version |
1.0 |
S3D Structural Workbook Prerequisite |
StructCrossSections-SAISC-2002.xls |
Delivered but Deprecated Steel Standards
The following workbooks have been superseded by the secondary steel workbooks listed above.
AISC LRFD 3.1 Deprecated
This workbook is deprecated and HS_Struct-AISC-LRFD-3.1.xls should be used instead. It is still required for the delivered HS_Assembly.xls assembly library to work.
Hangers and Supports Workbook |
HS_HgrAisc-LRFD-3.1_Deprecated.xls |
Standard Name |
AISC-LRFD-3.1 |
Description |
American Institute of Steel Construction - Manual of Steel Construction(LRFD) |
Organization |
AISC |
Date |
2003 |
Version |
3.1 |
S3D Structural Workbook Prerequisite |
StructCrossSections-AISC-LRFD-3.1.xls |
AISC LRFD 3.0 Deprecated
Hangers and Supports Workbook |
HS_HgrAisc_Deprecated.xls |
Standard Name |
AISC-LRFD-3.0 |
Description |
American Institute of Steel Construction - Manual of Steel Construction(LRFD) |
Organization |
AISC |
Date |
2002 |
Version |
3.0 |
S3D Structural Workbook Prerequisite |
StructCrossSections-AISC-LRFD-3.0.xls |
AUST 05 Deprecated
Hangers and Supports Workbook |
HS_HgrAUST-05_Deprecated.xls |
Standard Name |
AUST-OneSteel-05 |
Description |
Australian Steel Table - 2005 - OneSteel Electronic Catalog Version 2.0.7 |
Organization |
AUST |
Date |
2005 |
Version |
2.0.7 |
S3D Structural Workbook Prerequisite |
StructCrossSections-AUST-05.xls |
CISC 7.2 Deprecated
Hangers and Supports Workbook |
HS_HgrCISC_Deprecated.xls |
Standard Name |
CISC-7.2 |
Description |
Canadian Institute of Steel Construction - 7th Edition, 2nd printing |
Organization |
CISC |
Date |
2002 |
Version |
7.2 |
S3D Structural Workbook Prerequisite |
StructCrossSections-CISC-7.2.xls |
Euro Deprecated
Hangers and Supports Workbook |
HS_HgrEuro_Deprecated.xls |
Standard Name |
Euro |
Description |
European Section Sizes |
Organization |
Euro |
Date |
2002 |
Version |
1.0 |
S3D Structural Workbook Prerequisite |
StructCrossSections-Euro.xls |
EURO OTUA 2002 Deprecated
Hangers and Supports Workbook |
HS_HgrEURO-OTUA-2002_Deprecated.xls |
Standard Name |
EURO-OTUA-2002 |
Description |
Caractéristiques Géométriques et Statiques OTUA Edition 2002 |
Organization |
OTUA |
Date |
2002 |
Version |
1 |
S3D Structural Workbook Prerequisite |
StructCrossSections-EURO-OTUA-2002.xls |
Japan Deprecated
Hangers and Supports Workbook |
HS_HgrJapan_Deprecated.xls |
Standard Name |
Japan |
Description |
Japanese Section Table |
Organization |
Japan |
Date |
2002 |
Version |
1.0 |
S3D Structural Workbook Prerequisite |
StructCrossSections-Japan.xls |