Frame Input Value Properties - Intergraph Smart 3D - Reference Data

Intergraph Smart 3D Hangers and Supports Data Driven Assembly Configuration

Language
English
Product
Intergraph Smart 3D
Subproduct
3D Symbols
Search by Category
Reference Data
Smart 3D Version
12.1 (2019)

These properties are input dimensions used to determine the total frame span and frame length.

IJUAhsFrameOffset1::Offset1Value

Specifies the distance that the first leg should be offset from the pipe. To select the offset value using Offset1Rule, do not type any value for this property.

IJUAhsFrameOffset1Rl::Offset1Rule

Defines an HgrSupportRule that returns the offset from the first leg to the pipe. The hanger rule must exist in the catalog; it can be a rule name or a ProgID. To select the offset value directly using Offset1Value, do not type any value for this property.

IJUAhsFrameOffset1Def::Offset1Definition

Specifies how Offset1 should be measured. If you type an unsupported value, or no value is assigned, then a default value of 1 is used. For I-Frame, the software ignores this value and always calculates the value from Pipe Center to Steel Center. The following values are allowed:

The following values are allowed for the T-Frame:

For I-Frame type is:

IJUAhsFrameOffset1Sel::Offset1Selection

Uses the hsSelection codelist in the HS_S3DAssy_Codelist.xls workbook to select Offset1 by either input or rule. The following values are allowed:

  • By Rule - 1 – Offset1Rule is used

  • By Input - 2 – Offset1Value is used

IJUAhsFrameOffset2::Offset2Value

Specifies the value of the distance that the second leg should be offset from the pipe. To specify the value of the offset using Offset2Rule, do not type any value for this property.

IJUAhsFrameOffset2Rl::Offset2Rule

Defines an HgrSupportRule that returns the offset from the second leg to the pipe. The hanger rule must exist in the catalog; it can be a rule name or a ProgID. To specify the offset value directly using Offset2Value, do not type any value for this property.

IJUAhsFrameOffset2Def::Offset2Definition

Specifies how the Offset2 should be measured. If you type an unsupported value, or do not assign a value, then the software uses the default value that is 1.

For U, T, and Box Frame types, Offset2Definition is same as Offset1Definition.

IJUAhsFrameOffset2Sel::Offset2Selection

Uses the hsSelection codelist in the HS_S3DAssy_Codelist.xls workbook to select Offset2 by either input or rule. The following values are allowed:

  • By Rule - 1 – Offset2Rule is used

  • By Input - 2 – Offset2Value is used

The following properties are applicable to T-Frame type only.

IJUAhsFrameOffset3::Offset3Value

Specifies the value of the distance that the second leg should be offset from the pipe. To specify the value of the offset using Offset3Rule, do not type any value for this property.

IJUAhsFrameOffset3Rl::Offset3Rule

Defines an HgrSupportRule that returns the offset from the second leg to the pipe. The hanger rule must exist in the catalog; it can be a rule name or a ProgID. To specify the offset value directly using Offset3Value, do not type any value for this property.

IJUAhsFrameOffset3Def::Offset3Definition

Specifies how the Offset3 should be measured. If you type an unsupported value, or do not assign a value, then the software uses the default value that is 1.

IJUAhsFrameOffset3Sel::Offset3Selection

Uses the hsSelection codelist in the HS_S3DAssy_Codelist.xls workbook to select Offset3 by either input or rule. The following values are allowed:

  • By Rule - 1 – Offset3Rule is used

  • By Input - 2 – Offset3Value is used

Supported values for T-Frame is as follows:

IJUAhsFrameShoeHeight::ShoeHeightValue

Specifies the distance that the main steel member should be offset from the pipe. To determine the shoe height using ShoeHeightRule, do not type any value for this property.

IJUAhsFrameShoeHeightRl::ShoeHeightRule

Defines an HgrSupportRule that returns the shoe height. The Hanger Rule must exist in the catalog; it can be a rule name or a ProgID. To determine the shoe height directly using ShoeHeightValue, do not type any value for this property.

IJUAhsFrameShoeHeightDef::ShoeHeightDefinition

Specifies how ShoeHeight should be measured. If you type an unsupported value, or do not assign a value, then a default value of 1 is used.

IJUAhsFrameShoeHeightSel::ShoeHeightSelection

Uses the hsSelection codelist in the HS_S3DAssy_Codelist.xls workbook to select ShoeHeightValue by either input or rule. The following values are allowed:

  • By Rule - 1 – ShoeHeightRule is used

  • By Input - 2 – ShoeHeightValue is used