HVACAssy_RectTypeR10 - Intergraph Smart 3D - Reference Data

Intergraph Smart 3D Hangers and Supports Assemblies

Language
English
Product
Intergraph Smart 3D
Subproduct
3D Symbols
Search by Category
Reference Data
Smart 3D Version
11 (2016)

Description: Frame Type R10
Assembly Name: HVAC_Assy,Ingr.SP3D.Content.Support.Rules.RectTypeR10
Workbook: HS_HVAC_Assy.xls
Workbook Sheet: HVACAssy_RectTypeR10
User Class Name: Frame Type R10
Part Number: HVACAssy_RectTypeR10_01
ProgID: HVAC_Assy,Ingr.SP3D.Content.Support.Rules.RectTypeR10

Support Placement Instructions

Use Place by Structure when the support is placed on horizontal duct running perpendicular to the supporting column.

  1. Click Place by Structure.

  2. Select the ducts.

  3. Select all the beams one at a time. Then, select the slab.

  4. If the support is not placed in the correct orientation, use the Toggle Connection to Straight Feature and Toggle Connection to Structure buttons to change the orientation. There are up to four toggles.

Use Place by Point when the support is placed on horizontal duct running parallel to the supporting column

  1. Click Place by Point.

  2. Select the ducts.

  3. Select all the beams one at a time. Then, select the slab.

  4. If the support is not placed in the correct orientation, use the Toggle Connection to Straight Feature and Toggle Connection to Structure buttons to change the orientation. There are up to four toggles.

Toggle Connection to Structure - Toggles the support to attach to the opposite face on the supporting steel section.

Toggle Connection to Straight Feature - Toggles the support to be reflected sections which face the opposite side of the duct.

Support Attributes

Attributes that are editable from the support's Property dialog box are italicized.

Interface Name: IJOAHgrHVACAssySecRule::SectionFromRule

Attribute User Name: Section From Rule

Description: Specifies whether Section should be included based on the rule.

Interface Name: IJOAHgrHVACAssyLSize::LSectionSize

Attribute User Name: Section Size

Description: L Section size which should be used for this support based on the Section from Rule.

Interface Name: IJOAHgrHVACAssyBOMDesc::BOM_DESC

Attribute User Name: BOM Description

Description: Input BOM Description which will be given by user.

Interface Name: IJOAHgrHVACAssyOHRule::OverhangFromRule

Attribute User Name: Overhang FromRule

Description: Specifies whether Overhang should be included based on the rule.

Interface Name: IJOAHgrHVACAssyLOH::OverhangLeft

Attribute User Name: Overhang Left

Description: Overhang Left which should be used for this support based on the Overhang From Rule.

Interface Name: IJOAHgrHVACAssyROH::OverhangRight

Attribute User Name: Overhang Right

Description: Overhang Right which should be used for this support based on the Overhang From Rule.