HVACAssy_RectTypeR3 - Intergraph Smart 3D - Reference Data

Intergraph Smart 3D Hangers and Supports Assemblies

Language
English
Product
Intergraph Smart 3D
Subproduct
3D Symbols
Search by Category
Reference Data
Smart 3D Version
11 (2016)

Description: Frame Type R3
Assembly Name: HVAC_Assy,Ingr.SP3D.Content.Support.Rules.RectTypeR3
Workbook: HS_HVAC_Assy.xls
Workbook Sheet: HVACAssy_RectTypeR3
User Class Name: Frame Type R3
Part Number: HVACAssy_RectTypeR3_1
ProgID: HVAC_Assy,Ingr.SP3D.Content.Support.Rules.RectTypeR3

Support Placement Instructions

Use Place by Structure when the support is placed on horizontal duct running perpendicular to the supporting steel.

  1. Click Place by Structure.

  2. Select the ducts.

  3. Select the beam first, and then select the slab.

  4. If the support is not placed in the correct orientation, use the Toggle Connection to Structure button to change the orientation. There are up to two toggles.

Use Place by Point when the support is placed on horizontal duct running parallel to the supporting steel

  1. Click Place by Point.

  2. Select the ducts.

  3. Select the beam first, and then select the slab.

  4. If the support is not placed in the correct orientation, use the Toggle Connection to Structure button to change the orientation. There are up to two toggles.

Toggle Connection to Structure - Toggles the support to attach to the opposite face on the supporting steel section.

Toggle Connection to Straight Feature – NA

Support Attributes

Attributes that are editable from the support's Property dialog box are italicized.

Interface Name: IJOAHgrHVACAssySecRule::SectionFromRule

Attribute User Name: Section From Rule

Description: Specifies whether the section should be included based on the rule.

Interface Name: IJOAHgrHVACAssyLSize::LSectionSize

Attribute User Name: Section Size

Description: Section size which should be used for this support based on the section from rule.

Interface Name: IJOAHgrHVACAssyBOMDesc::BOM_DESC

Attribute User Name: BOM Description

Description: Input BOM description which will be given by user.

Interface Name: IJOAHgrHVACAssyOffset::Offset

Attribute User Name: Offset

Description: Offset from bottom of the slab to vertical section top.