Description: L Shaped Field Supports
Symbol Name: FLSampleSupports,Ingr.SP3D.Content.Support.Rules.LFieldSupports
Workbook: HS_FlSample_Assy.xls
Workbook Sheet: FS6B, 5FSX3B
User Class Name: FS6B, 5FSX3B
Part Number: <sheet>_<number> (Ex.) FS6B_1
Inputs, Outputs, and Aspects:
ProgID: FLSampleSupports,Ingr.SP3D.Content.Support.Rules.LFieldSupports
Support Specification
Support Placement Instructions
This support can only be placed using Place by Structure.
-
Select the supported pipes.
-
Select the horizontal supporting steel.
-
Select the vertical supporting steel.
Toggle Connection to Structure - Toggles to the opposite steel face.
Toggle Connection to Straight Feature - N/A
Support Attributes
Attributes that are editable from the support's Property dialog box are italicized.
Attribute Name: IJOAHgrFL_JointType::JointType
Attribute User Name: Joint Type
Description: Specifies the type of welded joint between the two steel sections.
Attribute Name: IJOAHgrFL_ShoeH::ShoeH
Attribute User Name: Shoe Height
Description: The height of an attached shoe. Used to set the distance from the bottom of pipe to the top of steel.
Attribute Name: IJOAHgrFL_Clearance::Clearance
Attribute User Name: Clearance
Description: The distance from the edge of the pipe to the end of the L-Frame.
Attribute Name: IJOAHgrFL_StructOffset::StructOffset
Attribute User Name: Struct Offset
Description: Offsets the support along the pipe.
Attribute Name: IJUAHgrFL_SecStandard::SecStandard
Attribute User Name: Section Standard
Description: The steel section standard used in the support.
Attribute Name: IJUAHgrFL_SecType::SecType
Attribute User Name: Section Type
Description: The steel section type used.
Attribute Name: IJUAHgrFL_SecSize::SecSize
Attribute User Name: Section Size
Description: The part number of the steel section.
Attribute Name: IJUAHgrFL_MaxSpan::MaxSpan
Attribute User Name: Max Span
Description: Maximum span of the horizontal steel section.
Attribute Name: IJUAHgrFL_Plate::Plate
Attribute User Name: Plate
Description: Specifies whether or not a base plate should be included in the support.
Attribute Name: IJUAHgrFL_BP_Width::BP_Width
Attribute User Name: BasePlate Width
Description: The width of the base plate.
Attribute Name: IJUAHgrFL_BP_Depth::BP_Depth
Attribute User Name: BasePlate Depth
Description: The depth of the base plate.
Attribute Name: IJUAHgrFL_BP_Thickness::BP_Thickness
Attribute User Name: BasePlate Thickness
Description: The thickness of the base plate.
Attribute Name: IJUAHgrFL_Overlap::Overlap
Attribute User Name: Overlap
Description: The distance between the end of one section to the beginning of the other. Only used with a lapped joint type.