Description: Frame Type R3P
Assembly Name: HVAC_Assy,Ingr.SP3D.Content.Support.Rules.RectTypeR3
Workbook: HS_HVAC_Assy.xls
Workbook Sheet: HVACAssy_RectTypeR3P
User Class Name: Frame Type R3P
Part Number: HVACAssy_RectTypeR3P_1
ProgID: HVAC_Assy,Ingr.SP3D.Content.Support.Rules.RectTypeR3
Support Placement Instructions
Use Place by Structure when the support is placed on horizontal duct running perpendicular to the supporting steel.
-
Click Place by Structure.
-
Select the ducts.
-
Select the beam first, and then select the slab.
-
If the support is not placed in the correct orientation, use the Toggle Connection to Structure button to change the orientation. There are up to two toggles.
Use Place by Point when the support is placed on horizontal duct running parallel to the supporting steel
-
Click Place by Point.
-
Select the ducts.
-
Select the beam first, and then select the slab.
-
If the support is not placed in the correct orientation, use the Toggle Connection to Structure button to change the orientation. There are up to two toggles.
Toggle Connection to Structure - Toggles the support to attach to the opposite face on the supporting steel section.
Toggle Connection to Straight Feature – NA
Support Attributes
Attributes that are editable from the support's Property dialog box are italicized.
Interface Name: IJOAHgrHVACAssySecRule::SectionFromRule
Attribute User Name: Section From Rule
Description: Specifies whether section should be included based on the rule.
Interface Name: IJOAHgrHVACAssyLSize::LSectionSize
Attribute User Name: Section Size
Description: L Section size which should be used for this support based on the section from rule.
Interface Name: IJOAHgrHVACAssyBOMDesc::BOM_DESC
Attribute User Name: BOM Description
Description: Input BOM description which will be given by user.
Interface Name: IJOAHgrHVACAssyOffset::Offset
Attribute User Name: Offset
Description: Offset from bottom of the slab to vertical section top.
Interface Name: IJOAHgrHVACAssyFBSize::FBSectionSize
Attribute User Name: Flat Bar Size
Description: Flat bar section size which should be used for bottom of this support.