Description: Frame Type R2
Assembly Name: HVAC_Assy,Ingr.SP3D.Content.Support.Rules.RectTypeR2
Workbook: HS_HVAC_Assy.xls
Workbook Sheet: HVACAssy_RectTypeR2
User Class Name: Frame Type R2
Part Number: HVACAssy_RectTypeR2_01
ProgID: HVAC_Assy,Ingr.SP3D.Content.Support.Rules.RectTypeR2
Support Placement Instructions
Use Place by Structure when the support is placed on horizontal duct running perpendicular to the supporting column.
-
Click Place by Structure.
-
Select the ducts.
-
Select the beam.
-
If the support is not placed in the correct orientation, use the Toggle Connection to Straight Feature and Toggle Connection to Structure buttons to change the orientation. There are up to four toggles.
Use Place by Point when the support is placed on horizontal duct running parallel to the supporting column
-
Click Place by Point.
-
Select the ducts.
-
Optionally, select the beam.
-
If the support is not placed in the correct orientation, use the Toggle Connection to Straight Feature and Toggle Connection to Structure buttons to change the orientation. There are up to four toggles.
Toggle Connection to Structure - Toggles the support to attach to the opposite face on the supporting steel section.
Toggle Connection to Straight Feature – Toggles the support to be reflected sections which face the opposite side of the duct.
Support Attributes
Attributes that are editable from the support's Property dialog box are italicized.
Interface Name: IJOAHgrHVACAssySecRule::SectionFromRule
Attribute User Name: Section From Rule
Description: Specifies whether section should be included based on the rule.
Interface Name: IJOAHgrHVACAssyLSize::LSectionSize
Attribute User Name: Section Size
Description: Section size which should be used for this support based on the section from rule.
Interface Name: IJOAHgrHVACAssyBOMDesc::BOM_DESC
Attribute User Name: BOM Description
Description: Input BOM description which will be given by the user.
Interface Name: IJOAHgrHVACAssyR2OH::HorOverhang
Attribute User Name: Horizontal Overhang
Description: Overhang to increase the horizontal section length.
Interface Name: IJOAHgrHVACAssyR2OH::VerOverhang
Attribute User Name: Vertical Overhang
Description: Overhang to increase the vertical section length.