Creates or modifies property values or displays status information about an object. The properties that display depend on the reference data defined for the object.
Duct Run
Specifies the run to which the feature belongs.
Material
Specifies the object material type, such as Steel - Carbon or Steel - High Strength.
Thickness
Specifies the thickness of the object.
Insulation Material
Specifies the material of the insulation. If Insulation Specification is set to use the insulation defined by the equipment object, this field cannot be changed. However, if Insulation Specification is manually defined, select the insulation material from those available from the reference data.
The list contains the last five insulation materials selected. Click More to browse the catalog for the insulation material to use. If you set this field to Not Insulated, the Insulation Thickness field is disabled. If you set this field to Use Run Material, the along leg feature inherits the insulation material from the duct run.
To change the options on the list, edit the Insulation Material select list in Catalog.
Insulation Thickness
Specifies the thickness of the insulation.
Piping
If you selected Not Insulated in the Insulation Specification box, you cannot change the value in the Insulation Thickness box. However, if you manually entered the insulation specification, you must provide a corresponding insulation thickness value as per the specification. If you selected an insulation specification from the available list, the software automatically displays the corresponding thickness value as per the specification.
HVAC
If you selected Not Insulated in the Insulation Material box, this property is unavailable.
Number of Vanes
Specifies the number of vanes used for branches during routing. To add the weight and center of gravity of the branches vanes in the branches feature calculations, assign the values for the duct material and thickness of the branches feature as the values for the vane material and thickness equals (that is, these values are equal). The range of values for Number of Vanes includes non-negative integers.
Vane Length
Specifies the length of the specified vanes.
Name
Specifies the name of the object.
Part
Specifies the part assigned to the leg feature.