Specifies the options for placing an In-line component in the design.
Properties
Opens the Insert Component Settings dialog box. You can use this dialog box to define properties of the component after you select a feature and specify a part. For more information, see Insert Component Properties Dialog Box.
Select Straight or End Feature
Select the duct, duct end, component port, or nozzle for the component that you are placing.
Part
Defines the component to insert from the catalog. The list includes the last ten names of component parts that you have placed. The More option opens the Select Part dialog box for browsing the catalog for the correct part.
Enter Insertion Point
Positions the component that you are placing along the duct that you selected. You can use Tools > PinPoint and Tools > Point Along to define the precise location of the component on the duct run.
Finish
Places the component in the duct run.
Run
Defines the name of the duct run with the component that you placed. The selection list includes:
-
Duct runs assigned to the parent system of the end feature or straight feature that you selected
-
More to allow you to browse the catalog for a different duct run
-
New Duct Run to open the New Duct Run dialog box
-
New/Continue Run to use the duct run of the end feature or straight feature that you selected
Name
Defines the occurrence name of the component that you are placing. The name can have a maximum of 64 characters.
Flip
Changes the component port that is connected to the selected port.
Reference position
Defines the insertion point of the component by a particular port or by its origin.
Rotate
Rotates the component about the duct interactively around the feature axis.
Angle
Defines the angle for rotating the component about the duct.