RoundElbow Sheet - Intergraph Smart 3D - Reference Data

Intergraph Smart 3D HVAC Reference Data

Language
English
Product
Intergraph Smart 3D
Subproduct
HVAC
Search by Category
Reference Data
Smart 3D Version
12.1 (2019)

The RoundElbow sheet in the HVAC.xls workbook defines the round elbows that you want in the Catalog.

PartNumber

Type the part number for the round elbow. An example is B-100.

PartDescription

Type a description for the round elbow.

FaceWidth

Type the face width for the round elbow.

FaceDepth

Type the face depth for the round elbow.

ComponentType

Type the component type for the round elbow.

SymbolDefinition

Type the symbol definition for the round elbow.

Width

Type the width of the round elbow.

ElbowCurveRadius

Type the curve radius for the round elbow.

Angle

Specify the number of degrees in the angle for the round elbow.

For the remaining properties, (i) indicates an integer corresponding to a nozzle number assigned to the cross section. This method avoids a lengthy listing for all possibilities, like Nozzle(1):CrossSection, Nozzle(2):CrossSection, and Nozzle(3):CrossSection for three possible nozzles. When you type the nozzle properties in the workbook, substitute a number for i to assign the nozzle to the appropriate property.

Nozzle(i):Id

Identify the cross section for Nozzle 1. OCS-4 is an example.

Nozzle(i):CrossSection

Identify the cross section for the particular nozzle. OCS-4 is an example.

Nozzle(i):EndPrep

Type the coded end preparation for the nozzle. Examples of end preparations include Threaded, Screwed, Plain End, Welded, Bolted, Female, Male, and Ferule. In the reference data, a number represents each type of end preparation (for example, 1 for Threaded, 2 for Screwed and so on).

Nozzle(i):Thickness

Type the thickness of the nozzle.

Nozzle(i):FlangeWidth

Type the flange width for the nozzle.

Nozzle(i):FlowDirection

Type the flow direction for the nozzle.

Nozzle(i):PortDepth

Type the depth of the port for the nozzle.

Nozzle(i):CptOffset

Type the offset value for the component.