Process Data for Geometry Analysis and Repair - Intergraph Smart 3D - Administration

1. Click Process Geometry Data on the vertical toolbar.

   The Process Geometry Data ribbon displays.

2. Click Options to specify the options for this command.

   The Options dialog box displays.

   Set Options for Processing Data

3. Select the objects to process.

   You can select only part of the hull to process at a time if you want.

4. Click Check to specify the check settings, and run the check process.

   Check Data

5. Click Repair to specify the repair settings, and run the repair process.

   Repair Data

6. After checking and repairing all the data, click Process to specify the process settings, and run the process.

   Process Data

7. Click Save Changes if you want to save the data in .sat file format. The software saves the sheetbody that you processed along with all the reference curves loaded in the view.

   The data is saved in the version specified in the Acis Save Version box on the Options Dialog Box.

You should repeat the steps in this procedure as many times as needed.