Sets options for performing advanced surface operations.
Operation
Select the operation to perform. The operation remains selected until you choose another.
Split
Sets a single face to be split. Then, you select a single intersecting edge to be the splitter.
Select the Splitter
Sets an intersecting edge, or the point for the intersecting edge. This option is only active when the Split operation is selected.
Merge
Combines sheet-bodies and faces. The software attempts to merge them together into a new sheet-body.
Merge Tolerance
Controls the creation of tolerant geometry during the merge process.
Explode
Converts sheet-bodies to individual, disconnected, faces.
Rebuild
Creates new geometry when you select one or more faces by rebuilding the underlying surfaces with the specified degree and number of control points. You can specify that trimmed faces are converted to natural faces with the Trim to Boundaries option.
Snap
Adjusts the selected faces that lie within the specified tolerance to lie exactly on the plane. You can choose an object in the view to set the plane.
Select
Selects one or more objects from the view for the chosen operation.
Apply
Applies the operation to the selected objects.
Undo
Reverses the operation by replacing the results with the data before the operation was applied. You can modify a setting, re-apply, undo, and repeat.