Process Data for Geometry Analysis and Repair - Intergraph Smart 3D - Administration & Configuration - Hexagon PPM

1. Click Process Geometry Data Command on the vertical toolbar.

2. Click Options to specify the options for this command.

   Set Options for Processing Data

3. Select the objects to process.

   You can select only part of the hull to process at a time if you want.

4. Click Check to specify the check settings, and run the check process.

   Check Data

5. Click Repair to specify the repair settings, and run the repair process.

   Repair Data

6. After checking and repairing all the data, click the Process Geometry Data command to specify the process settings, and run the process.

   Process Data

7. Click Save Changes to save the data in the .sat file format. The software saves the sheetbody that you processed along with all the reference curves loaded in the view.

   The data is saved in the version specified in the Acis Save Version box on the Options Dialog.

You should repeat the steps in this procedure as many times as needed.