Order features for autorouting cable - Intergraph Smart 3D - Help

Intergraph Smart 3D Electrical

Language
English
Product
Intergraph Smart 3D
Subproduct
Electrical
Search by Category
Help
Smart 3D Version
12.1 (2019)
  1. Select a cable from Workspace Explorer. Alternatively, click Edit Cable Path Command .

  2. Select the cables in the Cable Selection dialog, and click OK.

  3. Click Accept to accept the selection.

  4. Click Select Way Features and select the cableway or conduit features in the network through which you want the cable to pass when routed using AutoRoute.

    • The software finds the shortest path between the entry and exit points, through all the way features. You can re-order the way features if the autorouted path is not appropriate.

    • Do not select more than 100 way features as this can cause AutoRoute to route inappropriately.

  5. Click Show Order of Way Features Show Order of Way Features on the Edit Cable Path ribbon.

  6. In the Order of Way Features dialog, select a feature to re-order.

    The feature you select in the dialog highlights in the graphic view of the software.

  7. Click Move Up or Move Down to change the order of selection.

    To remove a selected way feature from the list, click Remove. This action does not remove the branch feature from the model.

  8. If necessary, select additional way features, and repeat step 5 until the order is correct.

  9. Click OK to save the way features changes or click Cancel to undo the changes made.

  10. Click AutoRoute .

    The cable passes through the way features according to the modified order of way features.