Move a straight conduit - Intergraph Smart 3D - Help - Hexagon

Intergraph Smart 3D Electrical

Language
English
Product
Intergraph Smart 3D
Subproduct
Electrical
Search by Category
Help
Smart 3D Version
13
  1. Click Select .

  2. Select Conduit Features in the Locate Filter box.

  3. Select the conduit feature to move.

    Move a straight conduit STEP SELECT STRAIGHT

  4. Set the Lock Length as needed.

  5. Click Move From on the ribbon, and select the starting point of the move. The software assumes that the current location of the object is the starting point if you do not define one.

    Move a straight conduit STEP MOVE FROM

  6. Click Move To on the ribbon.

  7. Move the conduit to the new location.

    Move a straight conduit STEP MOVE TOMove a straight conduit STEP FINISH

  • When you move a straight feature, the default working plane is the plane of one of the adjacent turns. The software selects the turn first by the plane that includes branches, and then by the plane of larger nominal diameter.

  • You can select one of the orientation handles that are displayed at the ends of the straight feature as the move from point. These orientation handles allow you to move the feature in relation to the edge instead of the centerline. For example, you can use the orientation handles to align the bottom with the top of a beam.