Creates a new conduit run in your model using properties that you specify. You can access the New Conduit Run dialog by going to the Electrical task, selecting the Route Conduit command, and then selecting <New Conduit Run> from the Run option on the ribbon.
Standard
System
Displays or defines the system for the conduit. The last system that you selected is the default. Select More to display all defined systems. You can create a new system in the Systems and Specifications task.
Name
Displays or defines the name of the conduit that you are creating. The name is based on the Name Rule selection. If you want to type a new name for the run, in the Name Rule box, select User Defined, and then type a name for the run in the Name box.
Name Rule
Specify the naming rule that you want to use to name this run. You can select one of the listed rules or select User Defined to specify the run name yourself in the Name box.
Specification
Displays or defines the specification for the conduit. Specifications are assigned to systems in the Systems and Specifications task. Only those specifications that are allowed in the system that you selected appear. You define specifications in the reference data. See the Smart 3D Electrical Reference Data Help for information on defining specifications.
Nominal Conduit Diameter
Defines the nominal diameter of a conduit.
Surface Treatment and Coating
Interior Surface Treatment Requirement
Select the interior treatment requirement for the conduit. If you want to add, edit, or remove values that are available for selection, edit the Interior Surface Treatment select list in the Catalog task.
Interior Surface Treatment Type
Select the interior treatment type for the conduit. If you want to add, edit, or remove values that are available for selection, edit the Interior Surface Treatment select list in the Catalog task.
Exterior Surface Treatment Requirement
Select the exterior treatment requirement for the conduit. If you want to add, edit, or remove values that are available for selection, edit the Exterior Surface Treatment select list in the Catalog task.
Exterior Surface Treatment Type
Select the exterior treatment type for the conduit. If you want to add, edit, or remove values that are available for selection, edit the Exterior Surface Treatment select list in the Catalog task.
Cleaning Requirement
Select the cleaning requirement for the conduit. If you want to add, edit, or remove values that are available for selection, edit the Cleaning Requirement select list in the Catalog task.
Steamout Requirement
Select the steam out requirement for the conduit. If you want to add, edit, or remove values that are available for selection, edit the Steamout Requirement select list in the Catalog task.
Steamout Pressure
Specify the steamout pressure for the conduit. Include the pressure unit of measure, psi for pounds per square inch for example, when specifying this value.
Steamout Temperature
Specify the steamout temperature for the conduit. Include the temperature unit of measure, K for Kelvin, F for Fahrenheit, or C for Celsius for example, when specifying this value.
Auxiliary Treatment Requirement
Specify any auxiliary treatment requirement.
Auxiliary Treatment Type
Specify any auxiliary treatment type.
Interior Coating Requirement
Select the interior coating requirement for the conduit. If you want to add, edit, or remove values that are available for selection, edit the Coating Type select list in the Catalog task.
Interior Coating Type
Select the interior coating type for the conduit. If you want to add, edit, or remove values that are available for selection, edit the Coating Type select list in the Catalog task.
Interior Coating Area
Enter the total area that the coating covers.
Exterior Coating Requirement
Select the exterior coating requirement for the conduit. If you want to add, edit, or remove values that are available for selection, edit the Coating Type select list in the Catalog task.
Exterior Coating Type
Select the exterior coating type for the conduit. If you want to add, edit, or remove values that are available for selection, edit the Coating Type select list in the Catalog task.
Coating Color
Select the color of the conduit coating. If you want to add, edit, or remove values that are available for selection, edit the Coating Color select list in the Catalog task.
Exterior Coating Area
Enter the total area that the coating covers.
Cable Fill
Fill Efficiency
Displays or defines the efficiency of the stacking of cables in the conduit. You can enter a real number, integer, or percent; for example, type 0.9, 90, or 90%.
Signal Type
Displays or defines the cable usage, which is used in tray fill calculations. If you want to add, edit, or remove values that are available for selection, edit the Signal Type sheet in the AllCodeLists.xls workbook in the reference data.
Voltage Grade
Displays or defines the voltage grade, which is used in determining the range of voltage that the conduit can carry. If you want to add, edit, or remove values that are available for selection, edit the Voltage Grade sheet in the AllCodeLists.xls workbook in the reference data.
Responsibility
Cleaning Responsibility
Select the party responsible for cleaning the conduit. If you want to add, edit, or remove values that are available for selection, edit the Cleaning Responsibility select list in the Catalog task.
Design Responsibility
Select the party responsible for designing the conduit. If you want to add, edit, or remove values that are available for selection, edit the Design Responsibility select list in the Catalog task.
Fabrication Responsibility
Select the party responsible for fabricating the conduit. If you want to add, edit, or remove values that are available for selection, edit the Fabrication Responsibility select list in the Catalog task.
Installation Responsibility
Select the party responsible for installing the conduit. If you want to add, edit, or remove values that are available for selection, edit the Installation Responsibility select list in the Catalog task.
Painting Responsibility
Select the party responsible for painting the conduit. If you want to add, edit, or remove values that are available for selection, edit the Painting Responsibility select list in the Catalog task.
Requisition Responsibility
Select the party responsible for ordering the conduit. If you want to add, edit, or remove values that are available for selection, edit the Requisition Responsibility select list in the Catalog task.
Supply Responsibility
Select the party responsible for delivering the conduit. If you want to add, edit, or remove values that are available for selection, edit the Supply Responsibility select list in the Catalog task.
Testing Responsibility
Select the party responsible for testing the conduit. If you want to add, edit, or remove values that are available for selection, edit the Testing Responsibility select list in the Catalog task.