General Tab (Cableway Straight Feature Properties Dialog) - Intergraph Smart 3D - Help - Hexagon

Intergraph Smart 3D Electrical

Language
English
Product
Intergraph Smart 3D
Subproduct
Electrical
Search by Category
Help
Smart 3D Version
13

Displays and defines the general properties of the selected cableway straight feature.

Standard

Cableway

Specifies the name of the cableway associated with the feature. You can select another run from the list if necessary.

<Load More Runs> loads all the runs that belong to the parent system. This option is not available after you load all the runs, or if the parent system contains less than 200 runs.

More displays the Select Cableway dialog. Use this option to select a cableway that is associated with a different electrical system.

Specification

Determines the specification assigned to the cableway.

Length

Specifies the length of the object as routed.

Is Covered

Specifies whether the cableway feature has a cover. By default, the cableway inherits the properties from the cable tray run. You can select:

  • Yes - Select this option if you want a cover.

  • No - Select this option if you do not want a cover.

  • Use Run Property - Select this option to inherit the cover properties from the run. The software automatically displays the run property along with in the box.

This option is only available for the cableway specifications that support cable tray covers.

Maintenance Volume

A maintenance volume is space reserved for installing and maintaining cables in a cable tray and can be defined at the cableway level and optionally overridden at the feature level. You can also define maintenance volumes for duct banks to reserve space for a mud mat below the duct bank. Use the Format > View command to turn on the Maintenance aspect so you can see the maintenance volumes in the model.

Maintenance Volume Properties Option

Select Use Run Properties to use the maintenance volume properties defined for the parent run. Select Default Feature Properties to define maintenance volume settings that are unique for this feature. This option is only available when editing the properties of a feature.

Maintenance Shape

Specifies the maintenance volume shape: Rectangle, Round, or Flat Oval.

Maintenance Diameter

Specifies the diameter of the maintenance volume. This option is only available when Maintenance Shape is set to Round.

Maintenance Width

Specifies the width of the maintenance volume. This option is only available when Maintenance Shape is set to Rectangle or Flat Oval.

Maintenance Depth

Specifies the depth of the maintenance volume. This option is only available when Maintenance Shape is set to Rectangle or Flat Oval.

Maintenance Justification

Specifies how the maintenance volume (gray box below) aligns with the feature (blue cross section below). There are ten options available: (1) Top Left, (2) Top Center, (3) Top Right, (4) Center Left, (5) Center Center, (6) Center Right, (7) Bottom Left, (8) Bottom Center, (9) Bottom Right, and User Defined.

Maintenance Volume Justification Positions CONCEPT

Maintenance Width Offset

Specifies the width offset distance. This option is only available when Maintenance Justification is set to User Defined.

Maintenance Depth Offset

Specifies the depth offset distance. This option is only available when Maintenance Justification is set to User Defined.

Fill Information

Percent Fill

Displays or defines the percent cable fill in the cableway feature.