Pullpit or Manhole Sample Data - Intergraph Smart 3D - Reference Data - Hexagon PPM

Intergraph Smart 3D Electrical Reference Data

Language
English (United States)
Product
Intergraph Smart 3D
Subproduct
Electrical
Search by Category
Reference Data
Smart 3D Version
13

The Pullpit or Manhole Sample Data.xls workbook available on the customer support web site defines pullpit or manhole parts available in the catalog.

Definition

Type the symbol definition ProgID for the equipment. It is the ProgID of the class in that VB symbol project, where you define the different CAD members for that equipment symbol.

Dry CogX

Type the center-of-gravity location for the part along the x-axis when the part is empty.

Dry CogY

Type the center-of-gravity location for the part along the y-axis when the part is empty.

Dry CogZ

Type the center-of-gravity location for the part along the z-axis when the part is empty.

Dry Weight

Type the total dry weight for the part.

Mirror Behavior Option

Specify the mirror behavior for the part. Valid codes are listed in the AllCodeLists.xls workbook on the Mirror Behavior Option sheet in the Codelist Number column.

Name

Type a name for the part.

Part Description

Type a description for the part.

ProcessEqTypes2

Type an appropriate EquipmentTypes2 codelist number from the AllCodeLists.xls workbook on the EquipmentTypes sheet.

Replacement Part Number

Type the part number for replacements of the part.

Symbol Definition

Type the symbol definition for the part. For more information about symbols, see the Symbols Reference Data Guide.

Water Weight

Enter the water weight of the part. Be sure to specify the units when entering this value.

The following nine properties are custom attributes and are used in the Pull box part class.

IJUAPullBoxDimensions::PullBoxHeight

Enter the height of the pull box part.

IJUAPullBoxDimensions::PullBoxLength

Enter the length of the pull box part.

IJUAPullBoxDimensions::PullBoxThickness

Enter the thickness of the pull box part.

IJUAPullBoxDimensions::PullBoxWidth

Enter the width of the pull box part.

IJUAPullBoxDimensions::PullBoxHole[port number]Height

Enter the height of the pull box at the port. Include the units, such as in for inches or mm for millimeters. A part can have multiple ports, and you can enter a height for each port.

IJUAPullBoxDimensions::PullBoxHole[port number]Offset

Enter the vertical offset for that port.

nIJUAPullBoxDimensions::PullBoxHole[port number]ThruEnd

Enter 1 (True) to open the box opening at the end, or 0 (False) to close the box opening at the end.

IJUAPullBoxDimensions::PullBoxHole[port number]ThruStart

Enter 1 (True) to open the box opening at the start, or 0 (False) to close the box opening at the start.

IJUAPullBoxDimensions::PullBoxHole[port number]Width

Enter the width of the pull box at the port. Include the units, such as in for inches or mm for millimeters. A part can have multiple ports, and you can enter a width for each port.

The following four properties are custom attributes and are used in the Nozzle part class.

Nozzle[port number]:NominalWidth

Enter the nominal width of the nozzle at the port. Include the units, such as in for inches or mm for millimeters. A part can have multiple ports, and you can enter a nominal width for each port.

Nozzle[port number]:NominalDepth

Enter the nominal depth of the nozzle at the port. Include the units, such as in for inches or mm for millimeters. A part can have multiple ports, and you can enter a nominal depth for each port.

Nozzle[port number]:ActualWidth

Enter the actual width of the nozzle at the port. Include the units, such as in for inches or mm for millimeters. A part can have multiple ports, and you can enter an actual width for each port.

Nozzle[port number]:ActualDepth

Enter the actual depth of the nozzle at the port. Include the units, such as in for inches or mm for millimeters. A part can have multiple ports, and you can enter an actual depth for each port.