General Tab (Control Point Properties Dialog Box) - Intergraph Smart 3D - Help

Intergraph Smart 3D Common

Language
English
Product
Intergraph Smart 3D
Subproduct
Common
Search by Category
Help
Smart 3D Version
13

Displays and defines the general properties of the selected control point.

Category

Select the type of properties that you want to view for the selected control point. Control point properties have only one category: Standard.

Control Point Type

Specifies the appropriate category of point. You select an option from the list. Catalog is the primary tool for defining select lists. For more information, see the Catalog User's Guide available from the Help > Printable Guides command in the software.

Control Point Subtype

Specifies a further breakdown for the type of control point. As in the Type box, you choose an option from a select list. Possible subtypes are Process Equipment, Mechanical Equipment, Foundation, Structure, Pipe Mfg Limit Point, Spool Break, Duct Break Point, WBS Pipe Break - Fabrication, WBS Break Point Type 1, WBS Break Point Type 2, WBS Break Point Type 3, WBS Break Point Type 4, WBS Pipe Break - Stress, WBS Break Point Type 5, WBS Pipe Break - Tracing, WBS Pipe Break - Generic, WBS Pipe Break - System, Elevation Callout, Ad Hoc Note, CAD Detail, Key Plan Callout, Support Notes, Isometric Reference Dimension, Isometric Start Point, and Pipe Stress Delimiter.

You can use the control point subtypes to classify the control point for use in drawings and reports. For more information, see Control Point Subtype Sheet in the Smart 3D Reference Data Guide available from the Help > Printable Guides command in the software.

Name

Specifies the name of the selected object. If the name is too long to entirely display in the box, point to the box to display the complete name as a tool tip. If the name is not defined by a rule, displays. If this name is generated by a naming rule, displays. If you enter a name in this box, Smart 3D automatically changes the naming rule to User Defined. The GenericNamingRules.xls workbook lists the naming rules used in the software. For more information about naming rules, see the Smart 3D Reference Data Guide available from the Help > Printable Guides command in the software.

Naming Rule

Displays the available name rules for the selected object. Specify the naming rule to use to name the object. You can select one of the listed rules, or you can select User Defined to specify a custom name in the Name box.

Diameter

Specifies the diameter of the object.

Diameter CONCEPT

Parent Object

Specifies the object to which the control point is associated.

Associativity

Specifies the associativity of the control point. You can select True or False.

E

Specifies the coordinate of the control point along the E-axis (East).

N

Specifies the coordinate of the control point along the N-axis (North).

EL

Specifies the coordinate of the control point along the EL-axis (Elevation).