Status Tab (Interference Server Settings Dialog) - Intergraph Smart 3D - Help

Intergraph Smart 3D Common

Language
English
Product
Intergraph Smart 3D
Subproduct
Common
Search by Category
Help
Smart 3D Version
13.1

Displays the status of the Database Detect process on the server. The status information includes the percentage of checking that has been completed, the amount remaining, when the process was started, and the estimated completion time.

The information on this tab is read-only.

Model

Displays the name of the model that is checked.

New and modified parts at process start

Displays the following time information for any new and modified parts after the process was started.

Last part modified

Displays the date and time (mm/dd/yyyy hh:mm:ss) at which the last part was created or modified in the Model database.

Current range to

Displays the date and time (mm/dd/yyyy hh:mm:ss) at which the last part modified was in consideration for interference checking.

From

Displays the date and time (mm/dd/yyyy hh:mm:ss) at which the interference check completed checking the last part modified.

Elapsed time

Displays the amount of time (hour, min, sec) during which the interference checking has been running for the new or changed parts.

Estimated completion

Displays the amount of time (hour, min, sec) estimated until the interference checking process completes.

Process start

Displays the date and time (mm/dd/yyyy hh:mm:ss) the process started.

Existing parts at process start

Displays the following time information for existing parts when the process was started.

Current range to

Displays the date and time (mm/dd/yyyy hh:mm:ss) at which the interference checking started for the existing parts.

From

Displays the date and time (mm/dd/yyyy hh:mm:ss) at which the interference checking ended for the existing parts.

First part created

Displays the date and time (mm/dd/yyyy hh:mm:ss) at which the first part was created in the database.

Elapsed time

Displays the amount of time (hour, min, sec) during which the interference checking has been running for the existing parts.

Estimated completion

Displays the amount of time (hour, min, sec) estimated until the interference checking process completes.

Status message

Displays textual information about the current status of the process on the server.

  • The status bar displays 100% when there are no delayed parts in the model. When the interference checking process completes processing all of the delayed parts, the status bar displays 100%.

  • Smart 3D updates the status bar every two minutes to minimize network traffic. If you need more frequent updates, you can select the Status tab to refresh the status, or you can close and reopen the Interference Server Settings Dialog.

  • Interference checking writes notes to the database for delayed and bad fouls. These notes include the reasons for the fouls. For example:

    Delayed foul - Found 2034 objects in this object range which equals or exceeds the limit of 2000 objects.

    Bad foul - Found 21342 objects in this object range which equals or exceeds the limit of 20000 objects.