Modifying Objects - Intergraph Smart 3D - Help

Intergraph Smart 3D Common

Language
English
Product
Intergraph Smart 3D
Subproduct
Common
Search by Category
Help
Smart 3D Version
13.1

When you select an object in the model, a ribbon displays with tools for editing those design objects. Usually, the ribbon for a single object is the same or very similar to the create command for that object. You can edit any design properties of the object by clicking the appropriate options to select new inputs.

When modifying an object in the Change Management model, the dialog displays a notification that you must set an active As-Built project before doing any modeling and you can only modify the active As-Built project data.

You must click Finish when you change an option or property associated with an object. Smart 3D commits changes to the object properties immediately to the model database. Placement options are typically on the left side of the ribbon. Object properties are typically on the right side of the ribbon.

1. Placement options

2. Object properties

In some cases, a create command places multiple design objects. In these cases, the modify ribbon for each object is different from the ribbon used to create those objects. The ribbon provides tools that focus on the modification of the specific object you have selected. For example, Smart 3D creates turns automatically as you use Route Pipe . There is no place turn command. You can, however, select and edit the turns.