-
In the Grids task, create grids as needed for drawing the trench path.
-
In the Civil task, click Place Trench Command .
-
Click Path on the Place Trench Ribbon, and then place two straight segments at an angle.
-
Click Edit on the Create Path Ribbon, and then click the sketch point at the miter location.
-
Select Bend from the Turn Type list.
-
In the Value box, type a radius for the curve segment. The curve segment radius must be less than the minimum adjacent segment length.
-
Click Finish to create the trench curve feature. An example is shown below.
1 - Straight feature
2 - Curve feature