Units Tab - Intergraph Smart 3D - Reference Data

Intergraph Smart 3D 2D Symbols

Language
English
Product
Intergraph Smart 3D
Subproduct
2D Symbols
Search by Category
Reference Data
Smart 3D Version
11 (2016)

Sets the primary units for dimensions.

Linear — Specifies the unit settings for a linear dimension.

Units — Sets the primary units for linear dimensions.

Unit Label — Sets the unit label. You can type up to 20 characters for a unit label.

Subunit Label — Sets the subunit label. You can type up to 20 characters for a subunit label.

Round-Off — Sets the round-off for the value. This control is sensitive to the unit setting (decimal or fractional) and contains values appropriate for the unit. This control is also sensitive to the dimension that you place and contains values appropriate for the dimension.

Maximum Subunits — Sets the maximum subunits value. You can type a value up to 255. This value applies to feet and inches. For example, if you type 13, the dimension appears as 13 inches and not 1 foot and 1 inch.

Angular — Sets the units for an angular dimension.

Units — Sets the primary units for angular dimensions. Options are Degrees, Deg-Min-Sec, or Radians.

Round-Off — Sets the round-off for the value. This control is sensitive to the unit setting (decimal or fractional) and contains values appropriate for the unit. This control is also sensitive to the dimension that you place and contains values appropriate for the dimension.

Zeroes — Specifies if a zero is on the left or right of the decimal in a dimension.

Leading — Places a zero to the left of the decimal point if no numbers appear to the left.

Trailing — Places zeros to the right of the decimal point. The number of zeros placed is based on the active setting for Round-Off. For example, if the dimensional value is .5, and the round-off setting is .1234, the dimensional value appears as .5000.

Delimiter — Specifies the decimal delimiter for a dimension.

  • Period — Sets a period as the decimal delimiter.

  • Comma — Sets a comma as the decimal delimiter.

  • Space — Sets a space as the decimal delimiter.

See Also

Format Dimension Dialog Box
Modify Dimension Style Dialog Box
New Dimension Style Dialog Box
Dimension Properties Dialog Box