Displays Isogen and user-specified attributes specific to welds.
-
Isogen can output some weld attributes to the isometric drawing in special weld enclosures.
-
Weld attributes can also be output to the weld list on the isometric drawing and in the welding report files.
Attribute names and descriptions
WELD-GAP
Sets the length of the weld. This attribute is used in Intergraph Spoolgen.
CATEGORY
Indicates where the pipeline object is assembled along with other pipeline objects to form a spool or pipeline. Valid input data is NONE, FABRICATION, ERECTION, or OFFSHORE.
STATUS
Controls the appearance (solid or dotted) of a pipeline object in the Isogen-generated drawing and indicates whether it is dimensioned. Valid input data is STANDARD, DOTTED-DIMINESIONED, DOTTED-UNDIMENSIONED, or UNDIMENSIONED.
REPEAT-WELD- IDENTIFIER
Identifies a component as having a specific set of weld numbers.
WELD-SPEC
Specifies the welding specification.
WELD-REMARK-NUMBER
Associates a text remark with a weld. Valid input data is a remark ID number that is extracted from a specified Remarks file during isometric generation.
PLANT
Specifies the name of the facility where the weld is located.
UNIQUE-COMPONENT- IDENTIFIER
Specifies a unique identifier for the weld.
SUPPRESS-ITEM-CODE
Specifies whether the weld displays in the material list. Valid input data is TRUE (the item code is suppressed, so the weld does not display on the material list) or FALSE (the weld displays on the material list).
PIPING-SPEC
Specifies the default piping specification reference.
TRACING-SPEC
Specifies the default tracing specification reference.
INSULATION-SPEC
Specifies the default insulation specification reference.
ITEM-DESCRIPTION
Provides a description of the weld. This attribute allows welds with the same item code to have different material descriptions.
MISC-SPEC1 to MISC-SPEC5
Provides for up to five user-specified miscellaneous specification references that can hold additional, arbitrary data.
INSULATION
Indicates whether the component is insulated. Valid input data is ON or OFF.
TRACING
Indicates whether the component is traced. Valid input data is ON or OFF.
NAME
Provides a user-specified identifier for the weld.
MATERIAL-LIST
Specifies how Isogen handles the pipeline object in the material list that is generated for the isometric drawing. Valid input data is INCLUDE (display the object item code in the material list only), EXCLUDE (exclude the object item code from the material list), or INCLUDE WITH ISO (display the item code on the isometric drawing and in the material list; this option applies only to in-line components).
THICKNESS or RATING
Specifies the thickness of the weld.
WELD-TYPE
Specifies a text identifier on the weld. This attribute is distinct from the weld SKEY or from an implied end type.
COST-FACTOR
Specifies an explicitly defined value that Isogen uses to calculate weld diameter totals.
JACKET
Specifies whether the weld is part of a jacketed system.
WELD-ATTRIBUTE1 to WELD-ATTRIBUTE100
Provides for up to 100 user-specified general-purpose weld attributes.