Displays Isogen and user-specified attributes that are currently allowed for a pipeline. You can output pipeline attribute values to the isometric drawing (1) and to report files (2).
Attribute names and descriptions
ALT-DESIGN-PRESSURE
Specifies the alternative design pressure for the pipeline.
ALT-DESIGN- TEMPERATURE
Specifies the alternative design temperature for the pipeline.
AREA
Identifies the section of the project to which the pipeline belongs. Used interchangeably with BATCH.
ATTRIBUTE0 to ATTRIBUTE199
Provides up to 200 user-specified general-purpose pipeline attributes that can be output in reports or plotted on isometric drawings.
BATCH
Identifies a section of the project to which the pipeline belongs. Used interchangeably with AREA.
BEND-RADIUS
Specifies the standard pulled bend radius.
CLEANING- REQUIREMENT
Indicates the cleaning procedure to use after testing.
CONSTRUCTION-TYPE
Specifies the construction status of the equipment, such as new, existing, future, demolish, and so forth.
CONSTRUCTION-WORK-PACKAGE
Specifies the construction work package to which the pipeline is assigned.
DATE-DMY
Indicates the date, where D=Day, M=Month, and Y=Year. Specify in any order.
DESIGN-CODE
Specifies the design code for the pipeline.
DESIGN-PRESSURE
Specifies the allowable design pressure.
DESIGN-TEMPERATURE
Specifies the allowable design temperature.
ENGINEERING-WORK-PACKAGE
Specifies the engineering work package to which the pipeline is assigned.
FLUID-CODE
Indicates the type of fluid intended to flow through the pipeline.
FROM
Specifies the start connection of the pipeline (for example, the equipment/instrument tag or line number).
HANDOVER-SUBSYSTEM-ID
Specifies a unique identification number for the handover subsystem.
HANDOVER-SYSTEM-ID
Specifies a unique identification number for the handover system.
HIGHEST-ASSEMBLY-NUMBER
Specifies the highest assembly number generated on the previous run of the pipeline.
HIGHEST-PART-NUMBER
Specifies the highest part number generated during the previous run of the pipeline.
HIGHEST-SPOOL-NUMBER
Specifies the highest spool number generated on the previous run of the pipeline.
HIGHEST-SUPPORT-WELD-NUMBER
Specifies the highest pipe support weld number generated on the previous run of the pipeline.
HIGHEST-UNIQUE- PART-IDENTIFIER
Specifies the highest unique part identifier generated on the previous run of the pipeline.
HIGHEST-WELD-NUMBER
Specifies the highest weld number generated on the previous run of the pipeline.
INSTALLATION-WORK-PACKAGE
Specifies the installation work package to which the pipeline is assigned.
INSULATION-SPEC
Specifies the default insulation specification reference.
INSULATION-SPEC-NUMBER
Specifies the identification code for the insulation specification.
INSULATION-THICKNESS
Specifies the width of the insulation from the internal surface of the pipeline to the external surface.
ITEM-ATTRIBUTE0 to ITEM-ATTRIBUTE9
Provides up to 10 user-specified attributes for use where component material descriptions are broken down into a series of short elements where data is defined in dynamic keywords such as MATL RATING SPEC THKS. This provides an alternative method to having a single long material description in a component DESCRIPTION attribute.
LINE-ID
Specifies a unique identification code for the pipeline.
MAIN-NOMINAL-SIZE
Specifies the diameter of the main segment of a pipeline.
MATERIAL-OF-CONSTRUCTION
Specifies the pipeline material of construction.
MISC-SPEC1 to MISC-SPEC5
Provides for up to five user-specified miscellaneous specification references that can hold additional, arbitrary data.
NDT-REQUIREMENT
Indicates if the pipeline requires non-destructive testing.
NOMINAL-CLASS
Identifies the pipeline design class.
NOMINAL-RATING
Identifies the pressure rating for the pipeline.
OFFSET-IMPERIAL
Specifies the offset in feet from datum point.
OFFSET-METRIC
Specifies the offset in meters from datum point.
OPERATING-PRESSURE
Specifies the pressure of the service fluid during operation.
OPERATING-TEMPERATURE
Specifies the temperature of the service fluid during operation.
OUTPUT-FILE-NAME
Overrides the default name given to the Isogen-generated drawing file.
Because the drawing file name is usually defined with the style settings, we do not
recommend using this attribute.
PAINT-COLOR
Defines the coating type for the pipeline.
PAINTING-SPEC
Specifies the default painting specification.
PID-DRAWING-NUMBER
Identifies the P&ID number from which the pipeline originates.
PID-REVISION
Identifies the P&ID revision.
PIPELINE-REFERENCE
Specifies the pipeline name.
PIPELINE-TEMP
Defines the design or operating temperature for the pipeline.
PIPELINE-TYPE
Indicates the type of pipeline construction.
PIPING-SPEC
Specifies the default piping specification reference.
PROCUREMENT-WORK- PACKAGE
Specifies the procurement work package to which the pipeline is assigned.
PROJECT-IDENTIFIER
Specifies the project number or name.
PWHT-REQUIREMENT
Indicates if the pipeline requires post weld heat treatment.
REPLOT
Indicates whether there is a single isometric re-plot request. Valid input data is TRUE (re-plot is enabled) or FALSE (re-plot is disabled).
REVISION
Specifies the revision identifier of the pipeline.
SEQUENCE-NUMBER
Identifies an additional number used in situations where a third-party system, such as the Fabrication shop control system, automatically assigns a sequence number to the processed pipeline.
SPECIFIC-GRAVITY
Specifies the specific gravity of the pipeline contents.
SPOOL-PREFIX
Specifies the string Isogen uses when creating spool identifiers.
SPOOL-NAMING-RULE
Indicates the text string that specifies the spool prefix, type of identifier (alpha or numeric), and the length of the spool identifier.
START-CO-ORDS
Defines the point that Isogen uses as the start point of the pipeline. The start point determines the start of weld and part number sequences.
STRESS-CATEGORY
Identifies the category for stress calculation.
STRESS-PACKAGE
Identifies the name assigned to the group of pipelines (package) requires stress analysis.
SUPPORT-WELD- PREFIX-ERECTION
Specifies the string that Isogen uses for the identification of all erection pipe support welds.
SUPPORT-WELD- PREFIX-FABRICATION
Specifies the string that Isogen uses for the identification of all fabrication pipe support welds.
SUPPORT-WELD- PREFIX-OFFSHORE
Specifies the string that Isogen uses for the identification of all offshore pipe support welds.
SYSTEM-ISOMETRIC- REFERENCE
Specifies the system isometric name.
TEST-MEDIUM
Identifies the type of fluid to use for the pipeline pressure test.
TEST-PRESSURE
Specifies the pressure to use for testing the pipeline for leaks or other failure.
TO
Specifies the end connection of the pipeline (for example, the equipment/instrument tag or line number).
TRACING-REQUIREMENT
Indicates if the pipeline requires heat testing.
TRACING-SPEC
Specifies the default tracing specification reference.
WELD-PREFIX-GENERAL
Specifies the prefix that the software uses for the identification of all welds.
WELD-PREFIX-ERECTION
Specifies the string that Isogen uses for the identification of all erection welds.
WELD-PREFIX-FABRICATION
Specifies the string that Isogen uses for the identification of all fabrication welds.
WELD-PREFIX-OFFSHORE
Specifies the string that Isogen uses for the identification of all offshore welds.