Defining standards used for calibration - HxGN EAM - 12.0.1 - Help - Hexagon

Define the specific piece of equipment used as a standard for the selected work order. The Standards Used popup displays a list of parts that serve as potential parts from which to specify the piece of equipment and/or lot used for the calibration.

To define standards used for calibration:

1. Select Work > Work Orders.

2. Select the work order for which to define standards used during calibration, and then click the Calibration tab.

3. Click Standards Used.

   The Standards Used popup automatically displays parts for which you specified Calibration Standard and to which you associated the work order’s equipment record on the Parts Associated tab of the Assets, Positions, or Systems form.

   See these references:

   • Creating parts

   • Associating parts

     If the work order for which you are defining standards used is a multiple equipment work order, then the system displays the parts used as calibration standards associated with the selected test point equipment record.

4. Select the part for which to specify equipment and/or lot information. The system automatically populates Part and Part Org.

5. Specify this information:

   Equipment - Specify the equipment record used for calibration.

   The system displays equipment records to which you associated the selected part via the Part field on the Record View tab of the Assets, Positions, or Systems form.

   See these references:

   • Defining assets

   • Defining positions

   • Defining systems

     If the work order for which you are defining standards used is a multiple equipment work order, you can associate a test point with a specific equipment or with all equipment on the work order.

     Lot - Specify the lot of the part record.

6. Click Submit.

To add a standard, click Add Standard. Enter the Part, Equipment, and Lot, and then click Submit.