Scenario 1: Freestyle viewing using a KeyPlan and TruSpace - CloudWorx for Intergraph Smart Review - Help

CloudWorx for SmartPlant Review Installation and Help

PPMProduct
CloudWorx for Intergraph Smart Review
aSubProduct
CloudWorx for SmartPlant Review
PPMCategory_custom
Help
Version_SThreeD_Custom
12 (2018)
Version_SPR
13.x(2018)

You can synchronize the viewpoint in the active CAD viewport to be driven by the viewpoint in the TruSpace viewer. When synchronized, the CAD viewpoint automatically follows the TruSpace viewpoint. Viewing can be more accessible in the TruSpace viewer because TruSpace content is based on each scanner position.

  1. Open a KeyPlan (already prepared) under a database.

  2. Start TruSpace from a scanner displayed in the KeyPlan viewer.

  3. Enable the synchronization of View Point.

    The active CAD viewport synchronizes with the TruSpace viewer.

  4. Switch to the TruSpace viewer.

  5. Perform viewpoint manipulations to look at a specific feature.

    The active CAD viewport automatically matches the TruSpace viewpoint.

  6. Click Accessories > CloudWorx > Regenerate Point Clouds to load more points for the viewpoint.

  7. In TruSpace, you can jump to a neighboring scanner position.

    The active CAD viewport updates automatically.

  8. You can also switch to another scanner position from the KeyPlan viewer.

    The active viewport updates automatically.