Section View - CloudWorx for Intergraph Smart Review - Help

CloudWorx for SmartPlant Review Installation and Help

PPMProduct
CloudWorx for Intergraph Smart Review
aSubProduct
CloudWorx for SmartPlant Review
PPMCategory_custom
Help
Version_SThreeD_Custom
12 (2018)
Version_SPR
13.x(2018)

Accessories > CloudWorx > Clip Point Cloud > Section View

Defines a plane in 3D along a specified coordinate axis (relative to the view), and then hide the points on one side of that plane, so that a cross-section view of the point cloud results.

To create a section view:

  1. Click Accessories > CloudWorx > Clip Point Cloud > Section View, and then select one of the Section View commands. For example, X Positive defines a plane whose normal direction is X+, and all the points on the opposite side of the plane are clipped.

  2. Input the data point to place the section plane.

    The new section view clips the points.

  3. Use Clipping Manager to turn on or off any clipping records, or use Reset Clipping to turn off clipping records of the active clipping group. For more information, see Clipping Manager and Reset Clipping.