Point Cloud Information - CloudWorx for Intergraph Smart Review - Help

CloudWorx for SmartPlant Review Installation and Help

PPMProduct
CloudWorx for Intergraph Smart Review
aSubProduct
CloudWorx for SmartPlant Review
PPMCategory_custom
Help
Version_SThreeD_Custom
12 (2018)
Version_SPR
13.x(2018)

Accessories > CloudWorx > Inquiry and Measurement > Point Cloud Information

Displays coordinate information for a selected point in a point cloud, and provides general information about the point cloud. The coordinates and distance parameters are based on the world and the unit preference selected in the Open ModelSpace View dialog box.

To get point information:

  1. Click Accessories > CloudWorx > Inquiry and Measurement > Point Cloud Information.

  2. Pick a point in the point cloud.

    The software displays the point coordinates and an information box about the point cloud. If you right-click the mouse to cancel point selection, the information box displays the current ModelSpace view information.

  3. Ensure that the Disable Snap on Point Clouds option is cleared. Otherwise you only get the coordinate information. For more information, see Snap/Visibility.