Fitting to Point Clouds - CloudWorx for Intergraph Smart 3D - Help

CloudWorx for Intergraph Smart 3D Help

PPMProduct
CloudWorx for Intergraph Smart 3D
aSubProduct
Smart 3D
PPMCategory_custom
Help
Version_SThreeD_Custom
13

After loading the point cloud data into Smart 3D, you can route the pipes using the Route Pipe command. You can select a point on the point cloud, and start routing pipe runs as needed. For more information, see Routing with point cloud data.

Make sure you select the point cloud points in sequence while routing the pipe in the point cloud environment.