Specifies the longitudinal stiffness at the nozzle and along the run of the pipe, as calculated using another method.
Mi - In-plane Bending (longitudinal stiffness) Fax - Axial (Nozzle) (radial stiffness) Mo - Out-of-Plane Bending (circumferential stiffness) Mt - Torsional (Nozzle) (torsional stiffness) D - Direction cosine of shell |
|
Represents a nozzle on any type of head. |
Mi - In-plane Bending (longitudinal stiffness) Fax - Axial (Nozzle) (radial stiffness) Mo - Out-of-Plane Bending (circumferential stiffness) Mt - Torsional (Nozzle) (torsional stiffness) D - Direction cosine of head
|
If you do not define a stiffness value, the software uses the default rigid stiffness.