Add a new material to the database - CAESAR II - Help

CAESAR II Users Guide (2019 Service Pack 1)

Language
English
Product
CAESAR II
Search by Category
Help
CAESAR II Version
11.0 (2019)
  1. In the Material Database Editor, click Clear Screen to Add .

    The software saves any data currently shown in the editor window, and then clears the window contents.

  2. Type the required data for the new material, except for the allowable stresses. At a minimum, you must specify the Number and select All Codes in the Applicable Piping Code list. Do not type a value for Allowable Stress.

    You must use a number that is less than 1000. If you enter a number that currently exists in the database, the software prompts you to enter a different number.

  3. Click Save Material .

  4. After you save the new material, you can add subsequent records for the same material and different piping codes. Select the Applicable Piping Code for the material, and specify the allowable stresses.

  5. Click Save Material to save the new material.

  6. Repeat steps 4 and 5 to add new material records for each piping code that you need.

  7. Close the Material Database Editor, and open Piping Input .

    CAESAR II displays the new material as an option in the Material list.

    Piping Input Material Box with New Material