The following list details general information about Legacy HASP network (red) ESLs.
If you are using an SRM/LDK network (red) ESL, refer to Managing SRM Network Licenses (see Managing Network Software Licenses).
-
The red network ESL should be set up by a Network Administrator or someone familiar with Windows-based networks. If you are not familiar with concepts such as network protocols, broadcast, IP addresses, TCP, UDP, and Windows Services, please do not attempt to setup the red network ESL.
-
The red network ESL does not have to be attached to the network server. We recommend attaching the red network ESL to a computer that is always up and running, can be re-booted without impact to users, and is not the primary computer for any user on the network.
-
If you install an Intergraph CAS product on a network drive for multiple users to access, assign read/write privileges for all users to the [Product Folder]\System folder. Intergraph CAS applications write temporary files to the [Product Folder]\System folder that pertains to the installation. The [Product Folder]\System folder also needs to have read/write privileges for all users.
-
If you are using other network protocols, such as NetBIOS or IPX, check the SafeNet web site for instructions. The only protocol tested with Intergraph CAS products is TCP/IP.
-
The information provided in the analysis products Help file is a supplement to the NetHasp User's Guide, which is delivered as a PDF(_NETHASP.pdf) in Assidrv folder. CADWorx delivers this _NETHASP.pdf in the Utilities folder. Review the PDF file for any issues not addressed in the Help file.