Specifies the square tubing properties. To view the properties:
-
Click the plus (+) sign next to Square Tubing to expand the shape category.
-
Double-click the data table.
Fields
MEMBER - Member
Specifies the member name based on the depth of the steel member and the weight.
EDI - Electronic Data Interchange
Specifies the Electronic Data Interchange name for the member.
Depth - Depth
Specifies the depth of the steel member from flange to flange. The depth is defined in inches or millimeters.
Width - Width
Specifies the width of the flange on the steel member. The width is defined in inches and millimeters.
tnom - Wall Thickness
Specifies the nominal wall thickness of the member.
tdes - Wall Thickness (tdesign)
Specifies the design wall thickness of the member.
r1 - Root fillet radius
Specifies the radius of the root fillet.
r2 - Toe radius
Specifies the radius of the toe on the member.
UnitWeight - Unit Weight
Specifies the weight of the steel member per unit length.
JUA Fields
b_t - Ratio of Width over Thickness
Specifies the width to thickness ratio of the member.
h_t - Ratio of Height over Thickness
Specifies the height to thickness ratio of the member.
Design Fields
Perimeter - Perimeter
Specifies the outside perimeter for the steel member.
Area - Area
Specifies the cross-sectional area for the steel member.
Ixx - Moment of Inertia about X
Specifies the moment of inertia for the member's local x-axis.
Iyy - Moment of Inertia about Y
Specifies the moment of inertia for the section's local y-axis.
Sxx - Elastic Section Modulus about X
Specifies the section modulus for the member's local x-axis.
Syy - Elastic Section Modulus about Y
Specifies the section modulus for the member's local y-axis.
J - Torsional Moment of Inertia
Specifies the torsional moment of inertia for the member.
Rxx - Radius of Gyration about X
Specifies the radius of gyration for the member's local x-axis.
Ryy - Radius of Gyration about Y
Specifies the radius of gyration for the member's local y-axis.
Zxx - Plastic Section Modulus about X
Specifies the plastic section modulus for the member's local x-axis.
Zyy - Plastic Section Modulus about Y
Specifies the plastic section modulus for the member's local y-axis.
IsHollow - Is Hollow
Specify if the cross-section is hollow or not.
IsSymmetricAlongX - Is Symmetric About X
Specify if the cross-section is symmetrical along the local x-axis.
IsSymmetricAlongY - Is Symmetric About Y
Specify if the cross-section is symmetrical along the local y-axis.
Custom Data
Enables you to input custom fields using the New Field Dialog Box.
Picture Description
Displays an image of the member when available.
|
|
|
