Set selection codes on gasket and bolt components in the project - CADWorx - Help

CADWorx Spec Editor

PPMProduct
CADWorx
PPMCategory_custom
Help
Version_CADWorx
20.1 (2020 R1)
  1. If you do not have the Specification Editor open, then double-click the icon on the desktop.

  2. Click File > Open, then open the Tutorial_Inch.prj.

  3. Click Yes to update the project from the base catalog. Alternatively, you can click Review Update, review the tables with updates, click Force Update All, click OK, click OK again, and then click Yes.

  4. Double-click 150, and then expand Gaskets/Bolts/Welds.

  5. Click STUD BOLTS W/ NUTS, LENGTH_CMP_TBL LG, ASTM A193/194 GR B7/2H.

  6. Select BLT_150A from the Data Table list.

    The Selection Code box populates.

  7. Click Apply.

  8. Click STUD BOLTS W/ NUTS, LENGTH_CMP_TBL LG, ASTM A193/194 GR B7/2H Part A.

  9. Select BLT_150B from the Data Table list.

    The Selection Code box populates.

  10. Click Apply.

  11. Click STUD BOLTS W/ NUTS, LENGTH_CMP_TBL LG, ASTM A193/194 GR B7/2H Part B.

  12. Select BLT_150 from the Data Table list.

    The Selection Code box populates.

  13. Click Apply.

  14. Click STUD BOLTS W/ NUTS, LENGTH_CMP_TBL LG, ASTM A193/194 GR B7/2H Part C.

  15. Remove the Selection Code, and leave it blank.

  16. Click Apply.

  17. Click GASKET, 150LB, 1/8" THK.

  18. Select GAS_150 from the Data Table list.

    The Selection Code box populates.

  19. Click Apply.

  20. Click GASKET, 150LB, 1/8" THK Part A.

  21. Select GAS_150A from the Data Table list.

    The Selection Code box populates.

  22. Click Apply.

  23. Click GASKET, 150LB, 1/8" THK Part B.

  24. Select GAS_150B from the Data Table list.

    The Selection Code box populates.

  25. Click Apply.

  26. Click GASKET, 150LB, 1/8" THK Part C.

  27. Remove the Selection Code, and leave it blank

  28. Click Apply.

  29. Click File > Save.

Next, Assign gaskets and bolts to the flange in the project.