Set selection code defaults - CADWorx - Help

CADWorx Spec Editor

PPMProduct
CADWorx
PPMCategory_custom
Help
Version_CADWorx
20.1 (2020 R1)
  1. Open the Specification Editor.

  2. Click File > Open, and then open the Tutorial_Inch_Catalog.cat.

  3. Expand Data Tables, and then expand Gaskets/Bolts/Welds.

    You can also create new bolts and gasket data tables, and then assign the Selection Code when creating the new data tables. If you need to create a new data table, see Add a new data table to a category, or Add a new data table to a group folder.

  4. Expand Stud Bolts, and then click BLT_150.

  5. In Properties, type BLT_150 in the Selection Code box, and change the Color Index to Red.

  6. Click in another field to set the values.

  7. Click BLT_150A.

  8. In Properties, type BLT_150A in the Selection Code box, and change the Color Index to Green.

  9. Click in another field to set the values.

  10. Click BLT_150B.

  11. In Properties, type BLT_150B in the Selection Code box, and change the Color Index to Yellow.

  12. Click in another field to set the values.

  13. Expand Gasket, and then double-click GAS_150.

  14. In Properties, type GAS_150 in the Selection Code box, and change the Color Index to Yellow.

  15. Click in another field to set the values.

  16. Click GAS_150A.

  17. In Properties, type GAS_150A in the Selection Code box, and change the Color Index to Green.

  18. Click in another field to set the values.

  19. Click GAS_150B.

  20. In Properties, type GAS_150B in the Selection Code box, and change the Color Index to Red.

  21. Click in another field to set the values.

  22. Click File > Save.

Next, Assign gaskets and bolts to flange weld neck in the catalog.