Add a bolt data table with a default selection code - CADWorx - Help

CADWorx Spec Editor

20.1 (2020 R1)
  1. Click (+) on the Data Tables folder in Catalog Data.

    The Data Tables folder expands displaying the categories or groups depending on your view selection.

  2. Select Gaskets\Bolts\Welds.

    If you set your Data Table List Mode in the View tab to Group List Mode, then you must right-click Gaskets/Bolts/Welds, and then select Add Data Table. You can then continue to step 5.

  3. Click (+) on the Gaskets\Bolts\Welds folder.

    The folder expands, displaying the data tables.

  4. Select Bolts, right-click, and then select Add Data Table.

    The New Data Table dialog box displays with defaults for Name, Category, Type, BOM Type, and Color Index.

  5. Type a Name.

    If you set your Data Table List Mode in the View tab to Group List Mode, then you must select a Category, and Type after typing a name.

  6. Select a Size Table.

  7. Click the Size Table ellipsis , select the sizes to add from the Select Size list, and then click OK.

    Use the Select / deselect all check box to select or clear all sizes.

  8. Type a Part Number.

  9. Type the Selection Code for the bolt.

  10. Update the BOM Type list if needed.

  11. Select a Layer Name.

  12. Update the Color Index list if needed.

  13. Type the Sort Sequence.

  14. Type the Isogen Identifier.

  15. Select an Isogen SKEY.

  16. Select whether or not the component is an optional component, by selecting the Optional Component check box.

  17. Type the Description for the table.

  18. Click OK.

    The new data table displays in the Main Table List View and in Catalog Data.

Next, see Add a flanged or clamped component data table.