Edit a support component - CADWorx - Help

CADWorx Spec Editor

PPMProduct
CADWorx
PPMCategory_custom
Help
Version_CADWorx
20.1 (2020 R1)
  1. Click the pipe support component under the assembly in the Pipe Support Library pane.

    The Edit component pane displays.

  2. Change the Sort for the bill of materials, if needed.

  3. Change the Type for the bill of materials, if needed.

  4. Update the Steel Length, if needed.

  5. Update the Member, if needed.

  6. Update the Plate Width, if needed.

  7. Update the Center Line, if needed.

  8. Update the Plate Length, if needed.

  9. Remove or add connections as needed in the Connection list.

  10. Select a connection in the connection list, and then change the Attach Type, the End Type, and the Connect To, as needed.

  11. Update the X, Y, Z, Direction, and Alignment of the connection point.

  12. Update the long description in the Long box.

  13. Update the short description in the Short box.

  14. Update the tag in the Tag box.

  15. Update the part number in the Part Number box.

  16. Update the notes in the Notes box.

  17. Click Apply.