Specifies the flanges properties. To view the properties:
-
Click the plus (+) sign next to Flanges to expand the category.
-
Click a plus (+) sign next to a flange component.
-
Click the actual data table.
Some of the components do not have all properties. If a property is not listed for a component, then that component does not use the property. If the property is common to all components, you can find the information on that property in Common Component Properties.
Default Connection Settings
Apply same end type to all ends
Applies the same end type connection, such as Buttweld (BW), to all ends when set to True. When set to False, the software uses more than one end type connection.
Start
Specifies the start connection associated with the component.
End
Specifies the end connection associated with the component.
Required
MAINSIZE - Main Size
Specifies the main sizes for the component.
REDSIZE - Reduction Size
Specifies the reduction sizes for the component. The reduction property is only available on reducing components.
LEN - Length
Specifies the lengths for the component.
FLGTHK - Flange Thickness
Specifies the thickness of the flange.
FLGDIA - Flange Diameter
Specifies the diameter of the flange.
HDLE - HUB Diameter Large End
Specifies the diameter of the large end of the flange.
HDSE - HUB Diameter Small End
Specifies the diameter of the small end of the flange.
PENG - Pipe Engagement
Specifies the value of the pipe engagement.
PSB - Pipe Set Back
Specifies the value of the pipe set back for the flange. Use this property to set the pipe back in the socket weld flange component.
LJLEN - Lap Joint Length
Specifies the lab joint length for the flange.
WEIGHT - Weight
Specifies the weight for the component.
USER_PART_NUMBER - User Part Number
Enables you to specify unique part numbers for each individual component. To insert the USER_PART_NUMBER field, right-click the data table, and then select Add User Part Number Column. You can also accomplish this by double-clicking Custom Data in the Properties pane and creating the USER_PART_NUMBER field exactly as it appears here. If you do not need the USER_PART_NUMBER column, click Cancel.
Enhancement
RFD - Raised Face Diameter
Specifies the diameter of the raised face.
RFLEN - Raised Face Length
Specifies the length of the raised face.
BHD - Bolt Hole Diameter
Specifies the diameter of the bolt hole.
BCD - Bolt Circle Diameter
Specifies the diameter of the bolt circle.
BHN - Bolt Hole Number
Specifies the number of bolt holes.
OTD - Orifice Tap Diameter
Specifies the diameter of the orifice tab.
OTA - Orifice Tap Angle
Specifies the angle of the orifice tab.
OTN - Orifice Tap Number
Specifies the value attached to that specific orifice tab.
PID - Pipe Inside Diameter
Specifies the diameter of the inside of the pipe.
RF - Fillet Radius
Specifies the radius of the fillet.
Custom Data
Enables you to input fields using the New Field Dialog Box. You can access the custom data fields in CADWorx Plant through the Component Edit dialog box. For more information, see Component Custom Data Dialog Box and Local Edit in the CADWorx Plant Users Guide.
Picture Description
Displays an image of the component.
Listed below are the types of components available for selection in the table. Images are provided when available.
For custom pipe supports, user shapes, and custom topworks, the Picture Description displays Image Path. The software allows you to browse for a .png or .gif drawing, and then displays the drawing below the Image Path under Picture Description.
Flange Blind |
Flange Lap Joint |
||
1. BHD 2. RFLEN 3 and 4. FLGTHK = LEN 5. RFD 6. BCD 7. FLGDIA |
1. HDLE=HDSE 2. PID 3. FLGTHK 4. RFLEN 5. RFD 6. BCD 7. FLGDIA 8. LEN 9. BHD |
||
Long Weld Neck |
Flange Weld Neck |
||
1. HDLE 2. HDSE 3. PID 4. FLGTHK 5. RFLEN 6. RFD 7. BCD 8. FLGDIA 9. LEN 10. BHD |
1. HDLE 2. HDSE 3. PID 4. FLGTHK 5. RFLEN 6. RFD 7. BCD 8. FLGDIA 9. LEN 10. BHD |
||
Flange Reducing Slip On |
Flange Reducing Threaded |
||
1. HDLE = HDSE 2. PENG 3. REDSIZE 4. LEN 5. RFD 6. BCD 7. FLGDIA 8. RFLEN 9. FLGTHK 10. BHD |
1. HDLE 2. HDSE 3. PENG 4. LEN 5. REDSIZE 6. RFD 7. BCD 8. FLGDIA 9. RFLEN 10. FLGTHK 11. BHD |
||
Flange Reducing Weld Neck |
Flange Slip On |
||
1. HDLE 2. HDSE 3. PID 4. FLGTHK 5. RFLEN 6. RFD 7. BCD 8. FLGDIA 9. LEN 10. BHD |
1. HDLE = HDSE 2. MAINSIZE 3. PENG 4. LEN 5. RFD 6. BCD 7. FLGDIA 8. RFLEN 9. FLGTHK 10. BHD |
||
Flange Socket Weld |
Flange Threaded |
||
1. HDLE 2. HDSE 3. PENG 4. PSB 5. LEN 6. PID 7. RFD 8. BCD 9. FLGDIA 10. RFLEN 11. FLGTHK 12. BHD |
1. HDLE = HDSE 2. MAINSIZE 3. PENG 4. LEN 5. RFD 6. BCD 7. FLGDIA 8. RFLEN 9. FLGTHK 10. BHD |
||
Stub |
|||
1. HDLE 2. HDSE 3. PIPETHK 4. FLGTHK 5. FLGDIA 6. LEN |