-
Click Nozzle Generic Attach . Alternatively, type ENGENERIC on the command line, and press ENTER.
-
Select the nozzle flange face point in the drawing.
-
Select the nozzle buttweld end point in the drawing.
The Nozzle Generic Attach (Edit) dialog box displays.
-
Type a description in the Description box.
-
Type an equipment name in the Equipment Name box.
-
Select a size from the Size list if needed. Main size must be set before you can draw a generic nozzle.
-
To change the flange rating, select a rating from the Flange Rating list. A project and specification must be set before you can draw a generic nozzle.
-
Type the thickness of the flange in the Flange Thickness box. This must be higher than zero.
-
Select a Flange Type from the list.
-
If your specification contains selection codes, then you can select Applicable Gaskets and Applicable Bolts from the lists.
-
Select a layer from the Layer list, or leave the default.
-
Select a color from the Color list, or leave the default.
-
Click OK.
The generic nozzle places in the drawing.
-
A red arrow indicates the end point. The start and end points can be re-specified after the nozzle generic attachment is drawn.
-
To edit the generic nozzle, double-click it in the drawing.