Specifies Isogen properties for a component.
Symbol Information
-
Identifier
Specifies the identifier used by Isogen for the component. For more information, see SKEY Information.
-
Overwrite
Overwrites the default value of Isogen Identifier used by CADWorx and uses the value specified in Identifier.
-
SKEY
Specifies the SKEY used by Isogen for the component. For more information, see SKEY Information.
-
Overwrite
Overwrites the default value of Isogen SKEY used by CADWorx and uses the value specified in SKEY.
Message
Specifies the message displayed with the component on the isometric drawing.
-
Type
Specifies the type of graphic enclosing the message.
-
Text
Specifies the message text.
Spindle / Flat / Support Direction
Specifies a valve spindle direction, an eccentric reducer flat direction, or support direction.
-
Direction
Specifies the direction. Select North, South, East, West, Up, or Down.
-
Mark
Specifies a text message with details on the direction.
Isogen option switch 80 (dimension to valve centers) is only available if the valve has a spindle direction set.
Flow Arrow
Specifies how flow arrows are displayed for valves.
-
As drawn
Displays the flow arrow in the direction that the pipe was drawn.
-
Opposite
Displays the flow arrow in the opposite direction.
-
View
Displays a preview of the flow arrow on the drawing.
Isogen option switch 17 controls the display of flow arrows.
Miter Pipe Export Options
Specifies how miter pipe is exported to Isogen.
-
Pipe with Welds
Exports each straight pipe run in the component as a linear pipe piece with mitered ends and welded connections.
-
Bend
Exports all pipe segments in the component as a single miter bend.
-
Bend with Length
Exports all pipe segments in the component as a single miter bend. The length of the component is also added to the Long Annotation of the component, allowing two bends with different lengths to have separate marks in the bill of material.
Other
-
Spool
Specifies the spool identification. This value overrides the default spool value created by Isogen. Type the required alpha or numeric character.
-
Sketch
Specifies a .dwg detailed sketch to display with the isometric drawing. For more information on detailed sketches, see the Isogen Configuration User's Guide.
-
Dim Status
Specifies the dimensioning of individual components. Select Default, Dimensioned, Dotted Dimensioned, or Dotted Undimensioned.
-
Sheet #
Specifies the sheet number of an Isogen drawing. Type the required alpha or numeric character.
-
Mark
Specifies the mark number for a component. Type the required alpha or numeric character.
End Connections and Conditions
Specifies a set of conditions for up to four ends (End 1, End 2, End 3, and End 4).
-
Connection Type
Specifies the type of connection on the end
-
View
Displays a red arrow at the selected end on the drawing.
-
Male, Female, Unspecified, or None
Specifies the end condition of the selected condition type. These options are only available when the end condition of the connection type can be changed. For example, SC, SW, CP, GL, and PF allow either male or female end conditions. Unspecified is used for welded and flanged end conditions.
Reference Dimensions
Specifies dimension to use as reference for the component.
-
On
Turns on reference dimensions.
-
Primary
Defines reference dimensions relative to the primary axes of the model.
-
Skewed
Defines reference dimension relative to the defined reference points.
-
Pick points
Allows you to select reference points in the drawing.
-
View
Displays the reference points in the drawing.
-
Message
Specifies text for the reference dimensions.
-
SKEY
Specifies the SKEY used by Isogen for the reference dimensions. For more information, see SKEY Information.
-
Start Point
Displays X, Y, and Z coordinates for the start point. You can only edit Start Point when editing user shapes.
-
Reference Point 1
Displays X, Y, and Z coordinates for the first reference point.
-
Reference Point 2
Displays X, Y, and Z coordinates for the second reference point.